[PATCH v2 12/29] clk: mediatek: Add MT8196 topckgen clock support

[Chen-Yu Tsai]

Another thing,

On Tue, Jun 24, 2025 at 10:33 PM Laura Nao <laura.nao at collabora.com> wrote:
>
> Add support for the MT8196 topckgen clock controller, which provides
> muxes and dividers for clock selection in other IP blocks.
>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> Signed-off-by: Laura Nao <laura.nao at collabora.com>
> ---
>  drivers/clk/mediatek/Makefile              |    2 +-
>  drivers/clk/mediatek/clk-mt8196-topckgen.c | 1257 ++++++++++++++++++++
>  2 files changed, 1258 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/mediatek/clk-mt8196-topckgen.c
>
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index b1773d2bcb3d..bc0e86e20074 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -160,7 +160,7 @@ obj-$(CONFIG_COMMON_CLK_MT8195_VDOSYS) += clk-mt8195-vdo0.o clk-mt8195-vdo1.o
>  obj-$(CONFIG_COMMON_CLK_MT8195_VENCSYS) += clk-mt8195-venc.o
>  obj-$(CONFIG_COMMON_CLK_MT8195_VPPSYS) += clk-mt8195-vpp0.o clk-mt8195-vpp1.o
>  obj-$(CONFIG_COMMON_CLK_MT8195_WPESYS) += clk-mt8195-wpe.o
> -obj-$(CONFIG_COMMON_CLK_MT8196) += clk-mt8196-apmixedsys.o
> +obj-$(CONFIG_COMMON_CLK_MT8196) += clk-mt8196-apmixedsys.o clk-mt8196-topckgen.o
>  obj-$(CONFIG_COMMON_CLK_MT8365) += clk-mt8365-apmixedsys.o clk-mt8365.o
>  obj-$(CONFIG_COMMON_CLK_MT8365_APU) += clk-mt8365-apu.o
>  obj-$(CONFIG_COMMON_CLK_MT8365_CAM) += clk-mt8365-cam.o
> diff --git a/drivers/clk/mediatek/clk-mt8196-topckgen.c b/drivers/clk/mediatek/clk-mt8196-topckgen.c
> new file mode 100644
> index 000000000000..fc0c1227dd8d
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8196-topckgen.c

[...]

> +       FACTOR(CLK_TOP_APLL1_D4, "apll1_d4", "vlp_apll1", 1, 4),
> +       FACTOR(CLK_TOP_APLL1_D8, "apll1_d8", "vlp_apll1", 1, 8),
> +       FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "vlp_apll2", 1, 4),
> +       FACTOR(CLK_TOP_APLL2_D8, "apll2_d8", "vlp_apll2", 1, 8),

These aren't used anywhere in this driver, but they are referenced
directly in the vlpckgen driver. Maybe these should be moved over
to that driver instead? Otherwise we end up with some weird circular
link between the two clock controllers which doesn't seem correct
to me.

[...]