[PATCH v2 4/4] usb: mtu3: add support remote wakeup of mt8196

[Chunfeng Yun]

There are three USB controllers on mt8196, each controller's wakeup
control is different, add some specific versions for them.
Here add only for dual-role controllers.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: add wakeup for dual-role controllers
---
 drivers/usb/mtu3/mtu3_host.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index 7c657ea2dabd..d65b0f318436 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -46,6 +46,11 @@
 #define WC1_IS_P_95		BIT(12)
 #define WC1_IS_EN_P0_95		BIT(6)
 
+/* mt8196 */
+#define PERI_WK_CTRL0_8196	0x08
+#define WC0_IS_EN_P0_96		BIT(0)
+#define WC0_IS_EN_P1_96		BIT(7)
+
 /* mt2712 etc */
 #define PERI_SSUSB_SPM_CTRL	0x0
 #define SSC_IP_SLEEP_EN	BIT(4)
@@ -59,6 +64,8 @@ enum ssusb_uwk_vers {
 	SSUSB_UWK_V1_3,		/* mt8195 IP0 */
 	SSUSB_UWK_V1_5 = 105,	/* mt8195 IP2 */
 	SSUSB_UWK_V1_6,		/* mt8195 IP3 */
+	SSUSB_UWK_V1_7, 	/* mt8196 IP0 */
+	SSUSB_UWK_V1_8, 	/* mt8196 IP1 */
 };
 
 /*
@@ -100,6 +107,16 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
 		msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
 		val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
 		break;
+	case SSUSB_UWK_V1_7:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8196;
+		msk = WC0_IS_EN_P0_96;
+		val = enable ? msk : 0;
+		break;
+	case SSUSB_UWK_V1_8:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8196;
+		msk = WC0_IS_EN_P1_96;
+		val = enable ? msk : 0;
+		break;
 	case SSUSB_UWK_V2:
 		reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
 		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
-- 
2.46.0