[PATCH v3 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp for MT8188
Friday Yang
friday.yang at mediatek.com
Mon Jan 20 22:49:26 PST 2025
From: "friday.yang" <friday.yang at mediatek.com>
Add 'resets' and 'reset-names' properties for SMI LARBs to support
SMI reset operations.
On the MediaTek platform, some SMI LARBs are directly connected to
the SMI Common, while others are connected to the SMI Sub-Common,
which in turn is connected to the SMI Common. The hardware block
diagram can be described as follows.
SMI-Common(Smart Multimedia Interface Common)
|
+----------------+------------------+
| | |
| | |
| | |
| | |
| | |
larb0 SMI-Sub-Common0 SMI-Sub-Common1
| | | | |
larb1 larb2 larb3 larb7 larb9
Signed-off-by: Friday Yang <friday.yang at mediatek.com>
---
.../mediatek,smi-common.yaml | 2 ++
.../memory-controllers/mediatek,smi-larb.yaml | 20 +++++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 2f36ac23604c..4392d349878c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -39,6 +39,7 @@ properties:
- mediatek,mt8186-smi-common
- mediatek,mt8188-smi-common-vdo
- mediatek,mt8188-smi-common-vpp
+ - mediatek,mt8188-smi-sub-common
- mediatek,mt8192-smi-common
- mediatek,mt8195-smi-common-vdo
- mediatek,mt8195-smi-common-vpp
@@ -107,6 +108,7 @@ allOf:
compatible:
contains:
enum:
+ - mediatek,mt8188-smi-sub-common
- mediatek,mt8195-smi-sub-common
then:
required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2381660b324c..2e86bb3455f9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -69,6 +69,12 @@ properties:
description: the hardware id of this larb. It's only required when this
hardware id is not consecutive from its M4U point of view.
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: larb
+
required:
- compatible
- reg
@@ -125,6 +131,20 @@ allOf:
required:
- mediatek,larb-id
+ - if: # only for image, camera and ipe subsys
+ properties:
+ compatible:
+ const: mediatek,mt8188-smi-larb
+ mediatek,larb-id:
+ oneOf:
+ - enum:
+ [ 9, 10, 11, 12, 13, 16, 17, 18, 19, 20 ]
+
+ then:
+ required:
+ - resets
+ - reset-names
+
additionalProperties: false
examples:
--
2.46.0
More information about the Linux-mediatek
mailing list