[PATCH 0/8] Support Multi-frequency scale for UFS

[Ziqi Chen]

Hi Mani,

Thanks for you review~

On 1/19/2025 3:57 PM, Manivannan Sadhasivam wrote:
> On Thu, Jan 16, 2025 at 05:11:41PM +0800, Ziqi Chen wrote:
> 
> You missed CCing linux-arm-msm mailing list to the cover letter.
>
Thank you for reminder, I will cc this group in next patch version.

>> With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
>> plans. However, the gear speed is only toggled between min and max during
>> clock scaling. Enable multi-level gear scaling by mapping clock frequencies
>> to gear speeds, so that when devfreq scales clock frequencies we can put
>> the UFS link at the appropraite gear speeds accordingly.
>>
> 
> But the UFSHC PHY settings are not updated for each gear speed, isn't it? Then
> I'm wondering how much we get out of this 'multi-level gear scaling'.

Per design, we don't need to update any PHY setting for each gear speed 
mode.

> 
> - Mani
> 

-Ziqi

>> This series has been tested on below platforms -
>> SM8650 + UFS3.1
>> SM8750 + UFS4.0
>>
>>
>> Can Guo (6):
>>    scsi: ufs: core: Pass target_freq to clk_scale_notify() vops
>>    scsi: ufs: qcom: Pass target_freq to clk scale pre and post change
>>    scsi: ufs: core: Add a vops to map clock frequency to gear speed
>>    scsi: ufs: qcom: Implement the freq_to_gear_speed() vops
>>    scsi: ufs: core: Enable multi-level gear scaling
>>    scsi: ufs: core: Toggle Write Booster during clock scaling base on
>>      gear speed
>>
>> Ziqi Chen (2):
>>    scsi: ufs: core: Check if scaling up is required when disable clkscale
>>    ARM: dts: msm: Use Operation Points V2 for UFS on SM8650
>>
>>   arch/arm64/boot/dts/qcom/sm8650.dtsi | 51 ++++++++++++++++----
>>   drivers/ufs/core/ufshcd-priv.h       | 17 +++++--
>>   drivers/ufs/core/ufshcd.c            | 71 +++++++++++++++++++++-------
>>   drivers/ufs/host/ufs-mediatek.c      |  1 +
>>   drivers/ufs/host/ufs-qcom.c          | 60 ++++++++++++++++++-----
>>   include/ufs/ufshcd.h                 |  8 +++-
>>   6 files changed, 166 insertions(+), 42 deletions(-)
>>
>> -- 
>> 2.34.1
>>
>