[PATCH 2/2] PCI: mediatek-gen3: Configure PBUS_CSR registers for EN7581 SoC

[Lorenzo Bianconi]

Configure PBus base address and address mask in order to allow the hw
detecting if a given address is on PCIE0, PCIE1 or PCIE2.

Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index aa24ac9aaecc749b53cfc4faf6399913d20cdbf2..b172a46cf95a9c728291c5b7a88457d3b725681a 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -15,6 +15,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/msi.h>
 #include <linux/of_device.h>
@@ -24,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 
 #include "../pci.h"
@@ -127,6 +129,13 @@
 
 #define PCIE_MTK_RESET_TIME_US		10
 
+#define PCIE_EN7581_PBUS_ADDR(_n)	(0x00 + ((_n) << 3))
+#define PCIE_EN7581_PBUS_ADDR_MASK(_n)	(0x04 + ((_n) << 3))
+#define PCIE_EN7581_PBUS_BASE_ADDR(_n)	\
+	((_n) == 2 ? 0x28000000 :	\
+	 (_n) == 1 ? 0x24000000 : 0x20000000)
+#define PCIE_EN7581_PBUS_BASE_ADDR_MASK	GENMASK(31, 26)
+
 /* Time in ms needed to complete PCIe reset on EN7581 SoC */
 #define PCIE_EN7581_RESET_TIME_MS	100
 
@@ -931,7 +940,8 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
 static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
-	int err;
+	struct regmap *map;
+	int err, slot;
 	u32 val;
 
 	/*
@@ -945,6 +955,23 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	/* Wait for the time needed to complete the reset lines assert. */
 	msleep(PCIE_EN7581_RESET_TIME_MS);
 
+	map = syscon_regmap_lookup_by_compatible("airoha,en7581-pbus-csr");
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	/*
+	 * Configure PBus base address and address mask in order to allow the
+	 * hw detecting if a given address is on PCIE0, PCIE1 or PCIE2.
+	 */
+	slot = of_get_pci_domain_nr(dev->of_node);
+	if (slot < 0)
+		return slot;
+
+	regmap_write(map, PCIE_EN7581_PBUS_ADDR(slot),
+		     PCIE_EN7581_PBUS_BASE_ADDR(slot));
+	regmap_write(map, PCIE_EN7581_PBUS_ADDR_MASK(slot),
+		     PCIE_EN7581_PBUS_BASE_ADDR_MASK);
+
 	/*
 	 * Unlike the other MediaTek Gen3 controllers, the Airoha EN7581
 	 * requires PHY initialization and power-on before PHY reset deassert.

-- 
2.48.0