[PATCH net-next 2/9] net: dsa: mt753x: remove setting of tx_lpi parameters

[Russell King (Oracle)]

dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.

Remove setting any members in mt753x_get_mac_eee().

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9605febd3573..4c78d049b9f4 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -3088,12 +3088,6 @@ mt753x_setup(struct dsa_switch *ds)
 static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
 			      struct ethtool_keee *e)
 {
-	struct mt7530_priv *priv = ds->priv;
-	u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
-
-	e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
-	e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
-
 	return 0;
 }
 
-- 
2.30.2