[PATCH] dts: arm64: mediatek: mt8188: add more thermal trip points

[Daniel Lezcano]

Hi Matthias, Angelo,

I noticed Nicolas sent this patch but you were not in the recipients.


On 07/02/2025 21:31, Nicolas Pitre wrote:
> From: Nicolas Pitre <npitre at baylibre.com>
> 
> Provide the "switch on" thermal trip point to be used by the power
> allocator governor.
> 
> Signed-off-by: Nicolas Pitre <npitre at baylibre.com>

Acked-by: Daniel Lezcano <daniel.lezcano at linaro.org>


> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> index 338120930b..262eab8fd3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> @@ -472,6 +472,12 @@ cpu-little0-thermal {
>   			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>;
>   
>   			trips {
> +				cpu_little0_switch_on: trip-switch-on {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
>   				cpu_little0_alert0: trip-alert0 {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -510,6 +516,12 @@ cpu-little1-thermal {
>   			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>;
>   
>   			trips {
> +				cpu_little1_switch_on: trip-switch-on {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
>   				cpu_little1_alert0: trip-alert0 {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -548,6 +560,12 @@ cpu-little2-thermal {
>   			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>;
>   
>   			trips {
> +				cpu_little2_switch_on: trip-switch-on {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
>   				cpu_little2_alert0: trip-alert0 {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -586,6 +604,12 @@ cpu-little3-thermal {
>   			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>;
>   
>   			trips {
> +				cpu_little3_switch_on: trip-switch-on {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
>   				cpu_little3_alert0: trip-alert0 {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -624,6 +648,12 @@ cpu-big0-thermal {
>   			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>;
>   
>   			trips {
> +				cpu_big0_switch_on: trip-switch-on {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
>   				cpu_big0_alert0: trip-alert0 {
>   					temperature = <85000>;
>   					hysteresis = <2000>;
> @@ -658,6 +688,12 @@ cpu-big1-thermal {
>   			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>;
>   
>   			trips {
> +				cpu_big1_switch_on: trip-switch-on {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
>   				cpu_big1_alert0: trip-alert0 {
>   					temperature = <85000>;
>   					hysteresis = <2000>;


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog