[PATCH v9 00/13] further mt7988 devicetree work

[Frank Wunderlich]

Am 11. Juli 2025 00:10:22 MESZ schrieb patchwork-bot+netdevbpf at kernel.org:
>Hello:
>
>This series was applied to netdev/net-next.git (main)
>by Jakub Kicinski <kuba at kernel.org>:
>
>On Wed,  9 Jul 2025 13:09:36 +0200 you wrote:
>> From: Frank Wunderlich <frank-w at public-files.de>
>> 
>> This series continues mt7988 devicetree work
>> 
>> - Extend cpu frequency scaling with CCI
>> - GPIO leds
>> - Basic network-support (ethernet controller + builtin switch + SFP Cages)
>> 
>> [...]
>
>Here is the summary with links:
>  - [v9,01/13] dt-bindings: net: mediatek,net: update mac subnode pattern for mt7988
>    https://git.kernel.org/netdev/net-next/c/29712b437339
>  - [v9,02/13] dt-bindings: net: mediatek,net: allow up to 8 IRQs
>    https://git.kernel.org/netdev/net-next/c/356dea0baf4c
>  - [v9,03/13] dt-bindings: net: mediatek,net: allow irq names
>    https://git.kernel.org/netdev/net-next/c/23ac2a71bdbd
>  - [v9,04/13] dt-bindings: net: mediatek,net: add sram property
>    https://git.kernel.org/netdev/net-next/c/c4582a31efd9
>  - [v9,05/13] dt-bindings: net: dsa: mediatek,mt7530: add dsa-port definition for mt7988
>    https://git.kernel.org/netdev/net-next/c/588cb646ce70
>  - [v9,06/13] dt-bindings: net: dsa: mediatek,mt7530: add internal mdio bus
>    https://git.kernel.org/netdev/net-next/c/66a44adf4c3d
>  - [v9,07/13] arm64: dts: mediatek: mt7986: add sram node
>    (no matching commit)
>  - [v9,08/13] arm64: dts: mediatek: mt7986: add interrupts for RSS and interrupt names
>    (no matching commit)
>  - [v9,09/13] arm64: dts: mediatek: mt7988: add basic ethernet-nodes
>    (no matching commit)
>  - [v9,10/13] arm64: dts: mediatek: mt7988: add switch node
>    (no matching commit)
>  - [v9,11/13] arm64: dts: mediatek: mt7988a-bpi-r4: add aliases for ethernet
>    (no matching commit)
>  - [v9,12/13] arm64: dts: mediatek: mt7988a-bpi-r4: add sfp cages and link to gmac
>    (no matching commit)
>  - [v9,13/13] arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds
>    (no matching commit)
>
>You are awesome, thank you!

Hi

Any comments on the missing DTS parts or can they applied too?
regards Frank