[PATCH 024/114] clk: ingenic: x1000-cgu: convert from round_rate() to determine_rate()

[Brian Masney via B4 Relay]

From: Brian Masney <bmasney at redhat.com>

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney at redhat.com>
---
 drivers/clk/ingenic/x1000-cgu.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index feb03eed4fe8c8f617ef98254a522d72d452ac17..d80886caf393309a0c908c06fb5aa8b59aced127 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -84,16 +84,17 @@ static unsigned long x1000_otg_phy_recalc_rate(struct clk_hw *hw,
 	return parent_rate;
 }
 
-static long x1000_otg_phy_round_rate(struct clk_hw *hw, unsigned long req_rate,
-				      unsigned long *parent_rate)
+static int x1000_otg_phy_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
 {
-	if (req_rate < 18000000)
-		return 12000000;
-
-	if (req_rate < 36000000)
-		return 24000000;
+	if (req->rate < 18000000)
+		req->rate = 12000000;
+	else if (req->rate < 36000000)
+		req->rate = 24000000;
+	else
+		req->rate = 48000000;
 
-	return 48000000;
+	return 0;
 }
 
 static int x1000_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
@@ -161,7 +162,7 @@ static int x1000_usb_phy_is_enabled(struct clk_hw *hw)
 
 static const struct clk_ops x1000_otg_phy_ops = {
 	.recalc_rate = x1000_otg_phy_recalc_rate,
-	.round_rate = x1000_otg_phy_round_rate,
+	.determine_rate = x1000_otg_phy_determine_rate,
 	.set_rate = x1000_otg_phy_set_rate,
 
 	.enable		= x1000_usb_phy_enable,

-- 
2.50.1