[PATCH net v2 4/5] net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration

[Jakub Kicinski]

On Thu, 17 Apr 2025 16:45:14 +0100 Daniel Golle wrote:
> On Thu, Apr 17, 2025 at 08:10:55AM -0700, Jakub Kicinski wrote:
> > On Wed, 16 Apr 2025 01:51:42 +0100 Daniel Golle wrote:  
> > > +		/* PSE should not drop port8, port9 and port13 packets from WDMA Tx */
> > > +		mtk_w32(eth, 0x00002300, PSE_DROP_CFG);
> > > +
> > > +		/* PSE should drop packets to port8, port9 and port13 on WDMA Rx ring full */  
> > 
> > nit: please try to wrap at 80 chars. There's really no need to go over
> > on comments. Some of us stick to 80 char terminals.   
> 
> Too late now to send another revision...

I only applied the first 3 :)

> > > [...]
> > > diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> > > index 39709649ea8d1..eaa96c8483b70 100644
> > > --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> > > +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> > > @@ -151,7 +151,12 @@
> > >  #define PSE_FQFC_CFG1		0x100
> > >  #define PSE_FQFC_CFG2		0x104
> > >  #define PSE_DROP_CFG		0x108
> > > -#define PSE_PPE0_DROP		0x110
> > > +#define PSE_PPE_DROP(x)		(0x110 + ((x) * 0x4))
> > > +
> > > +/* PSE Last FreeQ Page Request Control */
> > > +#define PSE_DUMY_REQ		0x10C  
> > 
> > This really looks like misspelling of DUMMY, is it really supposed 
> > to have one 'M' ?  
> 
> I also thought that when I first saw that and have told MediaTek engineers
> about it, they told me that the register is called like that also in their
> datasheet and hence they want the name to be consistent in the driver.

Hm, maybe add a comment ? It confused both of us, probably going 
to confuse most people later on