[PATCH v9 2/3] ufs: core: fix error handler process for MCQ abort

[Peter Wang (王信友)]

On Thu, 2024-09-26 at 11:26 -0700, Bart Van Assche wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  On 9/25/24 8:45 PM, Peter Wang (王信友) wrote:
> > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> > index 24a32e2fd75e..06aa4ed1a9e6 100644
> > --- a/drivers/ufs/core/ufshcd.c
> > +++ b/drivers/ufs/core/ufshcd.c
> > @@ -5417,10 +5417,12 @@ ufshcd_transfer_rsp_status(struct ufs_hba
> *hba,
> > struct ufshcd_lrb *lrbp,
> >   }
> >   break;
> >   case OCS_ABORTED:
> > -result |= DID_ABORT << 16;
> > -break;
> >   case OCS_INVALID_COMMAND_STATUS:
> >   result |= DID_REQUEUE << 16;
> > +dev_warn(hba->dev,
> > +"OCS %s from controller for tag %d\n",
> > +(ocs == OCS_ABORTED? "aborted" :
> > "invalid"),
> > +lrbp->task_tag);
> >   break;
> >   case OCS_INVALID_CMD_TABLE_ATTR:
> >   case OCS_INVALID_PRDT_ATTR:
> > @@ -6466,26 +6468,12 @@ static bool ufshcd_abort_one(struct request
> > *rq, void *priv)
> >   struct scsi_device *sdev = cmd->device;
> >   struct Scsi_Host *shost = sdev->host;
> >   struct ufs_hba *hba = shost_priv(shost);
> > -struct ufshcd_lrb *lrbp = &hba->lrb[tag];
> > -struct ufs_hw_queue *hwq;
> > -unsigned long flags;
> >   
> >   *ret = ufshcd_try_to_abort_task(hba, tag);
> >   dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag,
> >   hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1,
> >   *ret ? "failed" : "succeeded");
> >   
> > -/* Release cmd in MCQ mode if abort succeeds */
> > -if (hba->mcq_enabled && (*ret == 0)) {
> > -hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(lrbp-
> >> cmd));
> > -if (!hwq)
> > -return 0;
> > -spin_lock_irqsave(&hwq->cq_lock, flags);
> > -if (ufshcd_cmd_inflight(lrbp->cmd))
> > -ufshcd_release_scsi_cmd(hba, lrbp);
> > -spin_unlock_irqrestore(&hwq->cq_lock, flags);
> > -}
> > -
> >   return *ret == 0;
> >   }
> >   
> > -----------------------------------------------------------------
> ----
> > 
> > 
> > This patch has several advantages:
> > 
> > 1. It makes the patch 'ufs: core: fix the issue of ICU failure'
> >     seem valuable.
> > 2. The patch is more concise.
> > 3. There is no need to fetch OCS to determine OCS: ABORTED
> >     on every CQ completion, which increases ISR time.
> > 4. The err_handler flow for SDB and MCQ would be consistent.
> > 5. There is no need for the MediaTek SDB quirk.
> > 
> > 
> > What do you think?"
> 
> Hi Peter,
> 
> Is the above patch sufficient? In MCQ mode, aborting a command
> happens
> as follows (simplified):
> (1) Send the ABORT TASK TMF. If this TMF succeeds, no SQE will be
>      generated. If this TMF succeeds it means that the SCSI command
> has
>      reached the UFS device and hence is no longer present in any
>      submission queue (SQ).
> (2) If the command is still in a submission queue, nullify the SQE.
> In
>      this case a CQE will be generated with status ABORTED.
> 
> It seems to me that the above patch handles (2) but not (1)?
> 
> Thanks,
> 
> Bart.

Hi Bart,

Regarding your description of 'ABORT TMF success' and 'SQE' 
I think there might be some misunderstanding.

In this section of the UFSHCI 4.0 specification. 
4.4.6 (Informative) Processing Abort in MCQ mode: An Implementation
Example
There are three case for MCQ abort:

1. When the host controller has already sent out the SQE 
   and the UFS device has already responded with the 
   corresponding response, the CQ Entry will automatically 
   increment by 1. This case is the simplest, the SQE 
   will have a corresponding CQE for the host to cleanup 
   resources.

2. When the host controller has not yet sent out this SQE 
  (SQ is not empty), the software can fill in 'nullify' to 
  notify the host controller that there is no need to send 
  it, and directly fill the corresponding response into the 
  CQ with OCS: ABORTED. This scenario is also straightforward, 
  the UFS device won't be aware, and only the host controller 
  needs to clean up the related resources.

3. When the host controller has already sent out the SQE 
   and is waiting for the response from the UFS device (CQE), 
   the software can initiate cleanup to notify the host 
   controller that there is no need to wait, and directly fill 
   the corresponding response into the CQ with OCS: ABORTED.

Therefore, when a TMF is successfully executed, for example, 
tag 0 has been aborted, the software will know that the UFS 
device will no longer return a response for tag 0. 
Thus, the host controller needs to initiate cleanup, 
allowing the CQE corresponding to this SQE to return, 
while also cleaning the resources for tag 0.

In both the second and third cases, no matter which one occurs, 
they will result in the CQE corresponding to the SQE being 
filled with OCS: ABORTED. So, as long as we directly 
requeue when OCS: ABORTED, it will satisfy both of these 
situations.

Thanks
Peter