[PATCH] regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)

[André Draszik]

Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().

Update the comments.

Signed-off-by: André Draszik <andre.draszik at linaro.org>
---
 drivers/regulator/helpers.c          | 8 ++++----
 drivers/regulator/mt6357-regulator.c | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 6e1ace660b8c..0def82eb8b46 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -125,7 +125,7 @@ static int regulator_range_selector_to_index(struct regulator_dev *rdev,
  *
  * Regulators that use regmap for their register I/O and use pickable
  * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
- * fields in their descriptor and then use this as their get_voltage_vsel
+ * fields in their descriptor and then use this as their get_voltage_sel
  * operation, saving some code.
  */
 int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
@@ -195,7 +195,7 @@ static int write_separate_vsel_and_range(struct regulator_dev *rdev,
  *
  * Regulators that use regmap for their register I/O and use pickable
  * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
- * fields in their descriptor and then use this as their set_voltage_vsel
+ * fields in their descriptor and then use this as their set_voltage_sel
  * operation, saving some code.
  */
 int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
@@ -250,7 +250,7 @@ EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_pickable_regmap);
  *
  * Regulators that use regmap for their register I/O can set the
  * vsel_reg and vsel_mask fields in their descriptor and then use this
- * as their get_voltage_vsel operation, saving some code.
+ * as their get_voltage_sel operation, saving some code.
  */
 int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
@@ -276,7 +276,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
  *
  * Regulators that use regmap for their register I/O can set the
  * vsel_reg and vsel_mask fields in their descriptor and then use this
- * as their set_voltage_vsel operation, saving some code.
+ * as their set_voltage_sel operation, saving some code.
  */
 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
 {
diff --git a/drivers/regulator/mt6357-regulator.c b/drivers/regulator/mt6357-regulator.c
index c0439a4e0b50..1eb69c7a6acb 100644
--- a/drivers/regulator/mt6357-regulator.c
+++ b/drivers/regulator/mt6357-regulator.c
@@ -123,7 +123,7 @@ struct mt6357_regulator_info {
  *
  * Regulators that use regmap for their register I/O can set the
  * da_vsel_reg and da_vsel_mask fields in the info structure and
- * then use this as their get_voltage_vsel operation.
+ * then use this as their get_voltage_sel operation.
  */
 static int mt6357_get_buck_voltage_sel(struct regulator_dev *rdev)
 {

---
base-commit: 5acd9952f95fb4b7da6d09a3be39195a80845eb6
change-id: 20240913-regulator-typos-5c918985e91e

Best regards,
-- 
André Draszik <andre.draszik at linaro.org>