[PATCH v8 3/3] drm/mediatek: Implement OF graphs support for display paths

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Tue Sep 10 01:38:24 PDT 2024


Il 08/08/24 05:48, CK Hu (胡俊光) ha scritto:
> Hi, Angelo:
> 
> On Tue, 2024-06-18 at 12:17 +0200, AngeloGioacchino Del Regno wrote:
>> It is impossible to add each and every possible DDP path combination
>> for each and every possible combination of SoC and board: right now,
>> this driver hardcodes configuration for 10 SoCs and this is going to
>> grow larger and larger, and with new hacks like the introduction of
>> mtk_drm_route which is anyway not enough for all final routes as the
>> DSI cannot be connected to MERGE if it's not a dual-DSI, or enabling
>> DSC preventively doesn't work if the display doesn't support it, or
>> others.
>>
>> Since practically all display IPs in MediaTek SoCs support being
>> interconnected with different instances of other, or the same, IPs
>> or with different IPs and in different combinations, the final DDP
>> pipeline is effectively a board specific configuration.
>>
>> Implement OF graphs support to the mediatek-drm drivers, allowing to
>> stop hardcoding the paths, and preventing this driver to get a huge
>> amount of arrays for each board and SoC combination, also paving the
>> way to share the same mtk_mmsys_driver_data between multiple SoCs,
>> making it more straightforward to add support for new chips.
>>
>> Reviewed-by: Alexandre Mergnat <amergnat at baylibre.com>
>> Tested-by: Alexandre Mergnat <amergnat at baylibre.com>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>> ---
> 
> [snip]
> 
>> +static int mtk_drm_of_ddp_path_build_one(struct device *dev, enum mtk_crtc_path cpath,
>> +					 const unsigned int **out_path,
>> +					 unsigned int *out_path_len)
>> +{
>> +	struct device_node *next, *prev, *vdo = dev->parent->of_node;
>> +	unsigned int temp_path[DDP_COMPONENT_DRM_ID_MAX] = { 0 };
>> +	unsigned int *final_ddp_path;
>> +	unsigned short int idx = 0;
>> +	bool ovl_adaptor_comp_added = false;
>> +	int ret;
>> +
>> +	/* Get the first entry for the temp_path array */
>> +	ret = mtk_drm_of_get_ddp_ep_cid(vdo, 0, cpath, &next, &temp_path[idx]);
>> +	if (ret) {
>> +		if (next && temp_path[idx] == DDP_COMPONENT_DRM_OVL_ADAPTOR) {
>> +			dev_err(dev, "Adding OVL Adaptor for %pOF\n", next);
> 
> This looks not an error.
> 

Thanks for catching that, I used that line for debugging and forgot to change it
back to dev_dbg(). Will fix.

>> +			ovl_adaptor_comp_added = true;
>> +		} else {
>> +			if (next)
>> +				dev_err(dev, "Invalid component %pOF\n", next);
>> +			else
>> +				dev_err(dev, "Cannot find first endpoint for path %d\n", cpath);
>> +
>> +			return ret;
>> +		}
>> +	}
>> +	idx++;
>> +
>> +	/*
>> +	 * Walk through port outputs until we reach the last valid mediatek-drm component.
>> +	 * To be valid, this must end with an "invalid" component that is a display node.
>> +	 */
>> +	do {
>> +		prev = next;
>> +		ret = mtk_drm_of_get_ddp_ep_cid(next, 1, cpath, &next, &temp_path[idx]);
>> +		of_node_put(prev);
>> +		if (ret) {
>> +			of_node_put(next);
>> +			break;
>> +		}
>> +
>> +		/*
>> +		 * If this is an OVL adaptor exclusive component and one of those
>> +		 * was already added, don't add another instance of the generic
>> +		 * DDP_COMPONENT_OVL_ADAPTOR, as this is used only to decide whether
>> +		 * to probe that component master driver of which only one instance
>> +		 * is needed and possible.
>> +		 */
>> +		if (temp_path[idx] == DDP_COMPONENT_DRM_OVL_ADAPTOR) {
>> +			if (!ovl_adaptor_comp_added)
>> +				ovl_adaptor_comp_added = true;
>> +			else
>> +				idx--;
>> +		}
>> +	} while (++idx < DDP_COMPONENT_DRM_ID_MAX);
>> +
>> +	/*
>> +	 * The device component might not be enabled: in that case, don't
>> +	 * check the last entry and just report that the device is missing.
>> +	 */
>> +	if (ret == -ENODEV)
>> +		return ret;
>> +
>> +	/* If the last entry is not a final display output, the configuration is wrong */
>> +	switch (temp_path[idx - 1]) {
>> +	case DDP_COMPONENT_DP_INTF0:
>> +	case DDP_COMPONENT_DP_INTF1:
>> +	case DDP_COMPONENT_DPI0:
>> +	case DDP_COMPONENT_DPI1:
>> +	case DDP_COMPONENT_DSI0:
>> +	case DDP_COMPONENT_DSI1:
>> +	case DDP_COMPONENT_DSI2:
>> +	case DDP_COMPONENT_DSI3:
>> +		break;
>> +	default:
>> +		dev_err(dev, "Invalid display hw pipeline. Last component: %d (ret=%d)\n",
>> +			temp_path[idx - 1], ret);
>> +		return -EINVAL;
>> +	}
>> +
>> +	final_ddp_path = devm_kmemdup(dev, temp_path, idx * sizeof(temp_path[0]), GFP_KERNEL);
>> +	if (!final_ddp_path)
>> +		return -ENOMEM;
>> +
>> +	dev_dbg(dev, "Display HW Pipeline built with %d components.\n", idx);
>> +
>> +	/* Pipeline built! */
>> +	*out_path = final_ddp_path;
>> +	*out_path_len = idx;
>> +
>> +	return 0;
>> +}
>> +
>> +static int mtk_drm_of_ddp_path_build(struct device *dev, struct device_node *node,
>> +				     struct mtk_mmsys_driver_data *data)
>> +{
>> +	struct device_node *ep_node;
>> +	struct of_endpoint of_ep;
>> +	bool output_present[MAX_CRTC] = { false };
>> +	int ret;
>> +
>> +	for_each_endpoint_of_node(node, ep_node) {
>> +		ret = of_graph_parse_endpoint(ep_node, &of_ep);
>> +		if (ret) {
>> +			dev_err_probe(dev, ret, "Cannot parse endpoint\n");
>> +			break;
>> +		}
>> +
>> +		if (of_ep.id >= MAX_CRTC) {
>> +			ret = dev_err_probe(dev, -EINVAL,
>> +					    "Invalid endpoint%u number\n", of_ep.port);
>> +			break;
>> +		}
>> +
>> +		output_present[of_ep.id] = true;
>> +	}
>> +
>> +	if (ret) {
>> +		of_node_put(ep_node);
>> +		return ret;
>> +	}
>> +
>> +	if (output_present[CRTC_MAIN]) {
>> +		ret = mtk_drm_of_ddp_path_build_one(dev, CRTC_MAIN,
>> +						    &data->main_path, &data->main_len);
>> +		if (ret && ret != -ENODEV)
>> +			return ret;
>> +	}
>> +
>> +	if (output_present[CRTC_EXT]) {
>> +		ret = mtk_drm_of_ddp_path_build_one(dev, CRTC_EXT,
>> +						    &data->ext_path, &data->ext_len);
>> +		if (ret && ret != -ENODEV)
>> +			return ret;
>> +	}
>> +
>> +	if (output_present[CRTC_THIRD]) {
>> +		ret = mtk_drm_of_ddp_path_build_one(dev, CRTC_THIRD,
>> +						    &data->third_path, &data->third_len);
>> +		if (ret && ret != -ENODEV)
>> +			return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>>   static int mtk_drm_probe(struct platform_device *pdev)
>>   {
>>   	struct device *dev = &pdev->dev;
>>   	struct device_node *phandle = dev->parent->of_node;
>>   	const struct of_device_id *of_id;
>>   	struct mtk_drm_private *private;
>> +	struct mtk_mmsys_driver_data *mtk_drm_data;
>>   	struct device_node *node;
>>   	struct component_match *match = NULL;
>>   	struct platform_device *ovl_adaptor;
>> @@ -824,7 +1048,31 @@ static int mtk_drm_probe(struct platform_device *pdev)
>>   	if (!of_id)
>>   		return -ENODEV;
>>   
>> -	private->data = of_id->data;
>> +	mtk_drm_data = (struct mtk_mmsys_driver_data *)of_id->data;
>> +	if (!mtk_drm_data)
>> +		return -EINVAL;
>> +
>> +	private->data = kmemdup(mtk_drm_data, sizeof(*mtk_drm_data), GFP_KERNEL);
> 
> This is redundant. You would assign private->data below.
> 

Right. Will remove.

>> +	if (!private->data)
>> +		return -ENOMEM;
>> +
>> +	/* Try to build the display pipeline from devicetree graphs */
>> +	if (of_graph_is_present(phandle)) {
>> +		dev_dbg(dev, "Building display pipeline for MMSYS %u\n",
>> +			mtk_drm_data->mmsys_id);
>> +		private->data = devm_kmemdup(dev, mtk_drm_data,
>> +					     sizeof(*mtk_drm_data), GFP_KERNEL);
>> +		if (!private->data)
>> +			return -ENOMEM;
>> +
>> +		ret = mtk_drm_of_ddp_path_build(dev, phandle, private->data);
>> +		if (ret)
>> +			return ret;
>> +	} else {
>> +		/* No devicetree graphs support: go with hardcoded paths if present */
>> +		dev_dbg(dev, "Using hardcoded paths for MMSYS %u\n", mtk_drm_data->mmsys_id);
>> +		private->data = mtk_drm_data;
>> +	};
>>   
>>   	private->all_drm_private = devm_kmalloc_array(dev, private->data->mmsys_dev_num,
>>   						      sizeof(*private->all_drm_private),
>> @@ -846,12 +1094,11 @@ static int mtk_drm_probe(struct platform_device *pdev)
>>   
>>   	/* Iterate over sibling DISP function blocks */
>>   	for_each_child_of_node(phandle->parent, node) {
>> -		const struct of_device_id *of_id;
>>   		enum mtk_ddp_comp_type comp_type;
>>   		int comp_id;
>>   
>> -		of_id = of_match_node(mtk_ddp_comp_dt_ids, node);
>> -		if (!of_id)
>> +		ret = mtk_drm_of_get_ddp_comp_type(node, &comp_type);
>> +		if (ret)
>>   			continue;
>>   
>>   		if (!of_device_is_available(node)) {
>> @@ -860,8 +1107,6 @@ static int mtk_drm_probe(struct platform_device *pdev)
>>   			continue;
>>   		}
>>   
>> -		comp_type = (enum mtk_ddp_comp_type)(uintptr_t)of_id->data;
>> -
>>   		if (comp_type == MTK_DISP_MUTEX) {
>>   			int id;
>>   
>> @@ -890,22 +1135,24 @@ static int mtk_drm_probe(struct platform_device *pdev)
>>   		 * blocks have separate component platform drivers and initialize their own
>>   		 * DDP component structure. The others are initialized here.
>>   		 */
>> -		if (comp_type == MTK_DISP_AAL ||
>> -		    comp_type == MTK_DISP_CCORR ||
>> -		    comp_type == MTK_DISP_COLOR ||
>> -		    comp_type == MTK_DISP_GAMMA ||
>> -		    comp_type == MTK_DISP_MERGE ||
>> -		    comp_type == MTK_DISP_OVL ||
>> -		    comp_type == MTK_DISP_OVL_2L ||
>> -		    comp_type == MTK_DISP_OVL_ADAPTOR ||
>> -		    comp_type == MTK_DISP_RDMA ||
>> -		    comp_type == MTK_DP_INTF ||
>> -		    comp_type == MTK_DPI ||
>> -		    comp_type == MTK_DSI) {
>> -			dev_info(dev, "Adding component match for %pOF\n",
>> -				 node);
>> -			drm_of_component_match_add(dev, &match, component_compare_of,
>> -						   node);
>> +		switch (comp_type) {
>> +		default:
>> +			break;
>> +		case MTK_DISP_AAL:
>> +		case MTK_DISP_CCORR:
>> +		case MTK_DISP_COLOR:
>> +		case MTK_DISP_GAMMA:
>> +		case MTK_DISP_MERGE:
>> +		case MTK_DISP_OVL:
>> +		case MTK_DISP_OVL_2L:
>> +		case MTK_DISP_OVL_ADAPTOR:
>> +		case MTK_DISP_RDMA:
>> +		case MTK_DP_INTF:
>> +		case MTK_DPI:
>> +		case MTK_DSI:
>> +			dev_info(dev, "Adding component match for %pOF\n", node);
>> +			drm_of_component_match_add(dev, &match, component_compare_of, node);
>> +			break;
> 
> This modification seems not related to OF graphs support. If you need this, separate this to another patch.
> 

Will do for v9.

Thanks,
Angelo

>>   		}
>>   
>>   		ret = mtk_ddp_comp_init(node, &private->ddp_comp[comp_id], comp_id);
>> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
>> index 78d698ede1bf..7e54d86e25a3 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
>> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
>> @@ -59,7 +59,7 @@ struct mtk_drm_private {
>>   	struct device *mmsys_dev;
>>   	struct device_node *comp_node[DDP_COMPONENT_DRM_ID_MAX];
>>   	struct mtk_ddp_comp ddp_comp[DDP_COMPONENT_DRM_ID_MAX];
>> -	const struct mtk_mmsys_driver_data *data;
>> +	struct mtk_mmsys_driver_data *data;
>>   	struct drm_atomic_state *suspend_state;
>>   	unsigned int mbox_index;
>>   	struct mtk_drm_private **all_drm_private;
>> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
>> index c255559cc56e..880ea37937da 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
>> @@ -904,9 +904,17 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host,
>>   	dsi->lanes = device->lanes;
>>   	dsi->format = device->format;
>>   	dsi->mode_flags = device->mode_flags;
>> -	dsi->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
>> -	if (IS_ERR(dsi->next_bridge))
>> -		return PTR_ERR(dsi->next_bridge);
>> +	dsi->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
>> +	if (IS_ERR(dsi->next_bridge)) {
>> +		ret = PTR_ERR(dsi->next_bridge);
>> +		if (ret == -EPROBE_DEFER)
>> +			return ret;
>> +
>> +		/* Old devicetree has only one endpoint */
>> +		dsi->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
>> +		if (IS_ERR(dsi->next_bridge))
>> +			return PTR_ERR(dsi->next_bridge);
>> +	}
>>   
>>   	drm_bridge_add(&dsi->bridge);
>>   




More information about the Linux-mediatek mailing list