[PATCH] wifi: mt76: mt7925: convert comma to semicolon

[Matthias Brugger]

On 04/09/2024 09:52, Chen Ni wrote:
> Replace comma between expressions with semicolons.
> 
> Using a ',' in place of a ';' can have unintended side effects.
> Although that is not the case here, it is seems best to use ';'
> unless ',' is intended.
> 
> Found by inspection.
> No functional change intended.
> Compile tested only.
> 
> Signed-off-by: Chen Ni <nichen at iscas.ac.cn>

Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>

> ---
>   drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
> index 9dc22fbe25d3..82c5a8def344 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
> @@ -2171,12 +2171,12 @@ void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
>   
>   	tlv = mt76_connac_mcu_add_tlv(skb, UNI_BSS_INFO_RLM, sizeof(*req));
>   	req = (struct bss_rlm_tlv *)tlv;
> -	req->control_channel = chandef->chan->hw_value,
> -	req->center_chan = ieee80211_frequency_to_channel(freq1),
> -	req->center_chan2 = ieee80211_frequency_to_channel(freq2),
> -	req->tx_streams = hweight8(phy->antenna_mask),
> -	req->ht_op_info = 4, /* set HT 40M allowed */
> -	req->rx_streams = hweight8(phy->antenna_mask),
> +	req->control_channel = chandef->chan->hw_value;
> +	req->center_chan = ieee80211_frequency_to_channel(freq1);
> +	req->center_chan2 = ieee80211_frequency_to_channel(freq2);
> +	req->tx_streams = hweight8(phy->antenna_mask);
> +	req->ht_op_info = 4; /* set HT 40M allowed */
> +	req->rx_streams = hweight8(phy->antenna_mask);
>   	req->band = band;
>   
>   	switch (chandef->width) {