[PATCH 2/4] arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply names

[Chen-Yu Tsai]

Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.

Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.

Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
 .../dts/mediatek/mt8183-kukui-jacuzzi.dtsi    | 26 ++++++++++---------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 7bbafe926558..f540dcac74ea 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -8,11 +8,13 @@
 #include <arm/cros-ec-keyboard.dtsi>
 
 / {
-	pp1200_mipibrdg: pp1200-mipibrdg {
+	pp1000_mipibrdg: pp1000-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "pp1200_mipibrdg";
+		regulator-name = "pp1000_mipibrdg";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1200_mipibrdg_en>;
+		pinctrl-0 = <&pp1000_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
@@ -24,7 +26,7 @@ pp1800_mipibrdg: pp1800-mipibrdg {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_lcd_en>;
+		pinctrl-0 = <&pp1800_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
@@ -44,11 +46,11 @@ pp3300_panel: pp3300-panel {
 		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
 	};
 
-	vddio_mipibrdg: vddio-mipibrdg {
+	pp3300_mipibrdg: pp3300-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "vddio_mipibrdg";
+		regulator-name = "pp3300_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vddio_mipibrdg_en>;
+		pinctrl-0 = <&pp3300_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
@@ -144,9 +146,9 @@ anx_bridge: anx7625 at 58 {
 		pinctrl-0 = <&anx7625_pins>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
-		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd10-supply = <&pp1000_mipibrdg>;
 		vdd18-supply = <&pp1800_mipibrdg>;
-		vdd33-supply = <&vddio_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
 
 		ports {
 			#address-cells = <1>;
@@ -389,14 +391,14 @@ &pio {
 		"",
 		"";
 
-	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -458,7 +460,7 @@ trackpad-int {
 		};
 	};
 
-	vddio_mipibrdg_en: vddio-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
-- 
2.47.0.163.g1226f6d8fa-goog