[PATCH] arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity

[Chen-Yu Tsai]

The reset line of the IT6505 bridge chip is active low, not active high.
It was incorrectly inverted in the device tree as the implementation at
the time incorrectly inverted the polarity in its driver, due to a prior
device having an inline inverting level shifter.

Fix the polarity now while the external display pipeline is incomplete,
thereby avoiding any impact to running systems.

A matching fix for the driver should be included if this change is
backported.

Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: <stable at vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
The matching driver change can be found at

    https://lore.kernel.org/all/20241029095411.657616-1-wenst@chromium.org/

 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index e3b58641f2c9..43c83620e479 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -422,7 +422,7 @@ it6505dptx: dp-bridge at 5c {
 		#sound-dai-cells = <0>;
 		ovdd-supply = <&mt6366_vsim2_reg>;
 		pwr18-supply = <&pp1800_dpbrdg_dx>;
-		reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 177 GPIO_ACTIVE_LOW>;
 
 		ports {
 			#address-cells = <1>;
-- 
2.47.0.163.g1226f6d8fa-goog