[PATCH RFC v2 5/5] selftest: gpio: Add a new set-get config test
Nícolas F. R. A. Prado
nfraprado at collabora.com
Fri Oct 25 12:45:40 PDT 2024
Add a new kselftest that sets a configuration to a GPIO line and then
gets it back to verify that it was correctly carried out by the driver.
Setting a configuration is done through the GPIO uAPI, but retrieving it
is done through the debugfs interface since that is the only place where
it can be retrieved from userspace.
The test reads the test plan from a YAML file, which includes the chips
and pin settings to set and validate.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
---
tools/testing/selftests/gpio/Makefile | 2 +-
.../gpio-set-get-config-example-test-plan.yaml | 15 ++
.../testing/selftests/gpio/gpio-set-get-config.py | 183 +++++++++++++++++++++
3 files changed, 199 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index e0884390447dcfffe4ca0b4fa0f1669463bb669c..bdfeb0c9aaddc436df77ada1d5ac0c80890960a7 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := gpio-mockup.sh gpio-sim.sh
+TEST_PROGS := gpio-mockup.sh gpio-sim.sh gpio-set-get-config.py
TEST_FILES := gpio-mockup-sysfs.sh
TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev gpio-chip-info gpio-line-name
CFLAGS += -O2 -g -Wall $(KHDR_INCLUDES)
diff --git a/tools/testing/selftests/gpio/gpio-set-get-config-example-test-plan.yaml b/tools/testing/selftests/gpio/gpio-set-get-config-example-test-plan.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..3b749be3c8dcf6822b7531424a6b1f8fca840a65
--- /dev/null
+++ b/tools/testing/selftests/gpio/gpio-set-get-config-example-test-plan.yaml
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+# Top-level contains a list of the GPIO chips that will be tested. Each one is
+# chosen based on the GPIO chip's info label.
+- label: "gpiochip_device_label"
+ # For each GPIO chip, multiple pin configurations can be tested, which are
+ # listed under 'tests'
+ tests:
+ # pin indicates the pin number to test
+ - pin: 34
+ # bias can be 'pull-up', 'pull-down', 'disabled'
+ bias: "pull-up"
+ - pin: 34
+ bias: "pull-down"
+ - pin: 34
+ bias: "disabled"
diff --git a/tools/testing/selftests/gpio/gpio-set-get-config.py b/tools/testing/selftests/gpio/gpio-set-get-config.py
new file mode 100755
index 0000000000000000000000000000000000000000..6f1444c8d46bcfc226f414520b74f4a59725854f
--- /dev/null
+++ b/tools/testing/selftests/gpio/gpio-set-get-config.py
@@ -0,0 +1,183 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2024 Collabora Ltd
+
+#
+# This test validates GPIO pin configuration. It takes a test plan in YAML (see
+# gpio-set-get-config-example-test-plan.yaml) and sets and gets back each pin
+# configuration described in the plan and checks that they match in order to
+# validate that they are being applied correctly.
+#
+# When the file name for the test plan is not provided through --test-plan, it
+# will be guessed based on the platform ID (DT compatible or DMI).
+#
+
+import time
+import os
+import sys
+import argparse
+import re
+import subprocess
+import glob
+import signal
+
+import yaml
+
+# Allow ksft module to be imported from different directory
+this_dir = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(this_dir, "../kselftest/"))
+
+import ksft
+
+
+def config_pin(chip_dev, pin_config):
+ flags = []
+ if pin_config.get("bias"):
+ flags += f"-b {pin_config['bias']}".split()
+ flags += ["-w", chip_dev, str(pin_config["pin"])]
+ gpio_mockup_cdev_path = os.path.join(this_dir, "gpio-mockup-cdev")
+ return subprocess.Popen([gpio_mockup_cdev_path] + flags)
+
+
+def get_bias_debugfs(chip_debugfs_path, pin):
+ with open(os.path.join(chip_debugfs_path, "pinconf-pins")) as f:
+ for l in f:
+ m = re.match(rf"pin {pin}.*bias (?P<bias>(pull )?\w+)", l)
+ if m:
+ return m.group("bias")
+
+
+def check_config_pin(chip, chip_debugfs_dir, pin_config):
+ test_passed = True
+
+ if pin_config.get("bias"):
+ bias = get_bias_debugfs(chip_debugfs_dir, pin_config["pin"])
+ # Convert "pull up" / "pull down" to "pull-up" / "pull-down"
+ bias = bias.replace(" ", "-")
+ if bias != pin_config["bias"]:
+ ksft.print_msg(
+ f"Bias doesn't match: Expected {pin_config['bias']}, read {bias}."
+ )
+ test_passed = False
+
+ ksft.test_result(
+ test_passed,
+ f"{chip['label']}.{pin_config['pin']}.{pin_config['bias']}",
+ )
+
+
+def get_devfs_chip_file(chip_dict):
+ gpio_chip_info_path = os.path.join(this_dir, 'gpio-chip-info')
+ for f in glob.glob("/dev/gpiochip*"):
+ proc = subprocess.run(
+ f"{gpio_chip_info_path} {f} label".split(), capture_output=True, text=True
+ )
+ if proc.returncode:
+ ksft.print_msg(f"Error opening gpio device {f}: {proc.returncode}")
+ ksft.exit_fail()
+
+ if chip_dict["label"] in proc.stdout:
+ return f
+
+
+def get_debugfs_chip_dir(chip):
+ pinctrl_debugfs = "/sys/kernel/debug/pinctrl/"
+
+ for name in os.listdir(pinctrl_debugfs):
+ if chip["label"] in name:
+ return os.path.join(pinctrl_debugfs, name)
+
+
+def run_test(test_plan_filename):
+ ksft.print_msg(f"Using test plan file: {test_plan_filename}")
+
+ with open(test_plan_filename) as f:
+ plan = yaml.safe_load(f)
+
+ num_tests = 0
+ for chip in plan:
+ num_tests += len(chip["tests"])
+
+ ksft.set_plan(num_tests)
+
+ for chip in plan:
+ chip_dev = get_devfs_chip_file(chip)
+ if not chip_dev:
+ ksft.print_msg("Couldn't find /dev file for GPIO chip")
+ ksft.exit_fail()
+ chip_debugfs_dir = get_debugfs_chip_dir(chip)
+ if not chip_debugfs_dir:
+ ksft.print_msg("Couldn't find pinctrl folder in debugfs for GPIO chip")
+ ksft.exit_fail()
+ for pin_config in chip["tests"]:
+ proc = config_pin(chip_dev, pin_config)
+ time.sleep(0.1) # Give driver some time to update pin
+ check_config_pin(chip, chip_debugfs_dir, pin_config)
+ proc.send_signal(signal.SIGTERM)
+ proc.wait()
+
+
+def get_possible_test_plan_filenames():
+ filenames = []
+
+ dt_board_compatible_file = "/proc/device-tree/compatible"
+ if os.path.exists(dt_board_compatible_file):
+ with open(dt_board_compatible_file) as f:
+ for line in f:
+ compatibles = [compat for compat in line.split("\0") if compat]
+ filenames.extend(compatibles)
+ else:
+ dmi_id_dir = "/sys/devices/virtual/dmi/id"
+ vendor_dmi_file = os.path.join(dmi_id_dir, "sys_vendor")
+ product_dmi_file = os.path.join(dmi_id_dir, "product_name")
+
+ with open(vendor_dmi_file) as f:
+ vendor = f.read().replace("\n", "")
+ with open(product_dmi_file) as f:
+ product = f.read().replace("\n", "")
+
+ filenames = [vendor + "," + product]
+
+ return filenames
+
+
+def get_test_plan_filename(test_plan_dir):
+ chosen_test_plan_filename = ""
+ full_test_plan_paths = [
+ os.path.join(test_plan_dir, f + ".yaml")
+ for f in get_possible_test_plan_filenames()
+ ]
+ for path in full_test_plan_paths:
+ if os.path.exists(path):
+ chosen_test_plan_filename = path
+ break
+
+ if not chosen_test_plan_filename:
+ tried_paths = ",".join(["'" + p + "'" for p in full_test_plan_paths])
+ ksft.print_msg(f"No matching test plan file found (tried {tried_paths})")
+ ksft.print_cnts()
+ sys.exit(4)
+
+ return chosen_test_plan_filename
+
+
+parser = argparse.ArgumentParser()
+parser.add_argument(
+ "--test-plan-dir", default=".", help="Directory containing the test plan files"
+)
+parser.add_argument("--test-plan", help="Test plan file to use")
+args = parser.parse_args()
+
+ksft.print_header()
+
+if args.test_plan:
+ test_plan_filename = os.path.join(args.test_plan_dir, args.test_plan)
+ if not os.path.exists(test_plan_filename):
+ ksft.print_msg(f"Test plan file not found: {test_plan_filename}")
+ ksft.exit_fail()
+else:
+ test_plan_filename = get_test_plan_filename(args.test_plan_dir)
+
+run_test(test_plan_filename)
+
+ksft.finished()
--
2.47.0
More information about the Linux-mediatek
mailing list