[PATCH 2/4] dt-bindings: memory: mediatek: Add smi-sub-common property for reset
Friday Yang (杨阳)
Friday.Yang at mediatek.com
Fri Oct 25 02:33:11 PDT 2024
On Thu, 2024-10-24 at 13:59 +0200, AngeloGioacchino Del Regno wrote:
> Il 24/10/24 03:28, Friday Yang (杨阳) ha scritto:
> > On Wed, 2024-08-21 at 10:55 +0200, Krzysztof Kozlowski wrote:
> > >
> > > External email : Please do not click links or open attachments
> > > until
> > > you have verified the sender or the content.
> > > On 21/08/2024 10:26, friday.yang wrote:
> > > > On the MediaTek platform, some SMI LARBs are directly linked to
> > > > SMI
> > > > common. While some SMI LARBs are linked to SMI sub common, then
> > > > SMI
> > > > sub common is linked to SMI common. Add 'mediatek,smi-sub-comm'
> > > > and
> > > > 'mediatek,smi-sub-comm-in-portid' properties here. The SMI
> > > > reset
> > > > driver could query which port of the SMI sub common the current
> > >
> > > LARB
> > > > is linked to through the two properties. The hardware block
> > > > diagram
> > > > could be described as below.
> > > >
> > > > SMI Common(Smart Multimedia Interface Common)
> > > > |
> > > > +----------------+-------
> > > > | |
> > > > | |
> > > > | |
> > > > | |
> > > > | |
> > > > larb0 SMI Sub Common
> > > > | | |
> > > > larb1 larb2 larb3
> > > >
> > > > Signed-off-by: friday.yang <friday.yang at mediatek.com>
> > > > ---
> > > > .../mediatek,smi-common.yaml | 2 ++
> > > > .../memory-controllers/mediatek,smi-larb.yaml | 22
> > >
> > > +++++++++++++++++++
> > > > 2 files changed, 24 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/memory-
> > >
> > > controllers/mediatek,smi-common.yaml
> > > b/Documentation/devicetree/bindings/memory-
> > > controllers/mediatek,smi-
> > > common.yaml
> > > > index 2f36ac23604c..4392d349878c 100644
> > > > --- a/Documentation/devicetree/bindings/memory-
> > >
> > > controllers/mediatek,smi-common.yaml
> > > > +++ b/Documentation/devicetree/bindings/memory-
> > >
> > > controllers/mediatek,smi-common.yaml
> > > > @@ -39,6 +39,7 @@ properties:
> > > > - mediatek,mt8186-smi-common
> > > > - mediatek,mt8188-smi-common-vdo
> > > > - mediatek,mt8188-smi-common-vpp
> > > > + - mediatek,mt8188-smi-sub-common
> > > > - mediatek,mt8192-smi-common
> > > > - mediatek,mt8195-smi-common-vdo
> > > > - mediatek,mt8195-smi-common-vpp
> > > > @@ -107,6 +108,7 @@ allOf:
> > > > compatible:
> > > > contains:
> > > > enum:
> > > > + - mediatek,mt8188-smi-sub-common
> > > > - mediatek,mt8195-smi-sub-common
> > > > then:
> > > > required:
> > > > diff --git a/Documentation/devicetree/bindings/memory-
> > >
> > > controllers/mediatek,smi-larb.yaml
> > > b/Documentation/devicetree/bindings/memory-
> > > controllers/mediatek,smi-
> > > larb.yaml
> > > > index 2381660b324c..5f162bb360db 100644
> > > > --- a/Documentation/devicetree/bindings/memory-
> > >
> > > controllers/mediatek,smi-larb.yaml
> > > > +++ b/Documentation/devicetree/bindings/memory-
> > >
> > > controllers/mediatek,smi-larb.yaml
> > > > @@ -69,6 +69,16 @@ properties:
> > > > description: the hardware id of this larb. It's only
> > > > required
> > >
> > > when this
> > > > hardware id is not consecutive from its M4U point of
> > > > view.
> > > >
> > > > + mediatek,smi-sub-comm:
> > > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > > + description: a phandle of smi_sub_common that the larb is
> > >
> > > linked to.
> > >
> > > Why do you have to smi phandle properties per each node?
> > >
> >
> > As shown in the picture from the commit message, we have multipule
> > smi-
> > sub-common, each SMI larb may link to one of the smi-sub-common. So
> > we
> > need the 'mediatek,smi-sub-comm' to describe which smi-sub-common
> > the
> > larb is linked to.
> > In next version, I will add two smi-sub-common to the diagram in
> > the
> > commit message.
> >
> > > > +
> > > > + mediatek,smi-sub-comm-in-portid:
> > > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > > + minimum: 0
> > > > + maximum: 7
> > > > + description: which port of smi_sub_common that the larb is
> > >
> > > linked to.
> > >
> > > Merge it into phandle.
> > >
> >
> > Just confirm,
> > Do you mean merge these two into one property, like:
> > mediatek,smi-sub-comm = <&phandle port-id>;
> >
> > > > +
> > > > required:
> > > > - compatible
> > > > - reg
> > > > @@ -125,6 +135,18 @@ allOf:
> > > > required:
> > > > - mediatek,larb-id
> > > >
> > > > + - if:
> > > > + properties:
> > > > + compatible:
> > > > + contains:
> > > > + enum:
> > > > + - mediatek,mt8188-smi-larb
> > > > +
> > > > + then:
> > > > + required:
> > > > + - mediatek,smi-sub-comm
> > > > + - mediatek,smi-sub-comm-in-portid
> > > > +
> > >
> > > and add it to the example (since you claim it is valid for every
> > > device).
> > >
>
> It's valid only for the Local Arbiters that have a sub-common port,
> which anyway
> are only the ones that are used by CAMSYS if I'm not wrong....
>
> Regardless of that, not all of the mt8188-smi-larb *require* smi-sub-
> comm.
>
> Besides, if the larb is anyway already linked to a sub-common, can't
> we just grab
> that from walking back?
> Or is this property's purpose to actually add a link to a sub-common?
>
> Regards,
> Angelo
>
> >
> > OK, I will add this to the example.
> >
> > > Best regards,
> > > Krzysztof
> > >
>
Not only camerasys has smi-sub-common, other subsys also has smi-sub-
common. And this property's purpose is to add a link to a sub-common,
this is right.
We will remove 'mediatek,smi-sub-comm', just use 'mediatek,smi'.
Merge 'mediatek,smi-sub-comm-in-portid' into 'mediatek,smi', SMI
driver should be changed to adapt this. Is this ok for you?
>
More information about the Linux-mediatek
mailing list