[PATCH 3/4] memory: mtk-smi: mt8188: Add SMI clamp function

[AngeloGioacchino Del Regno]

Il 24/10/24 03:29, Friday Yang (杨阳) ha scritto:
> On Wed, 2024-08-21 at 11:00 +0200, Krzysztof Kozlowski wrote:
>>   	
>> External email : Please do not click links or open attachments until
>> you have verified the sender or the content.
>>   On 21/08/2024 10:26, friday.yang wrote:
>>> In order to avoid handling glitch signal when MTCMOS on/off, SMI
>> need
>>> clamp and reset operation. Parse power reset settings for LARBs
>> which
>>> need to reset. Register genpd callback for SMI LARBs and apply
>> reset
>>> operations in the callback.
>>>
>>> Signed-off-by: friday.yang <friday.yang at mediatek.com>
>>> ---
>>>   drivers/memory/mtk-smi.c | 148
>> ++++++++++++++++++++++++++++++++++++++-
>>>   1 file changed, 146 insertions(+), 2 deletions(-)
>>>
>>
>> ...
>>
>>> +
>>> +static int mtk_smi_larb_parse_reset_info(struct mtk_smi_larb
>> *larb)
>>> +{
>>> +struct device_node *reset_node;
>>> +struct device *dev = larb->dev;
>>> +int ret;
>>> +
>>> +/* only larb with "resets" need to get reset setting */
>>> +reset_node = of_parse_phandle(dev->of_node, "resets", 0);
>>
>> Nope, you do not parse rasets.
> 
> 1.If I need to use the Linux reset control framework, 'resets' is the
> required property.

Leave that to the reset API, don't manually parse the resets phandle here,
that's what Krzysztof was meaning.

> 2.'reset-names' give the list of reset signal name strings sorted in
> the same order as the 'resets' property. SMI driver will use 'reset-
> names' to match reset signal names with reset specifiers.
> 3.Not all SMI larbs need to apply reset operations, only SMI larbs
> which may have bus glitch issues need this. Just to confirm if this
> larb support reset function.
> 
>>
>>> +if (!reset_node)
>>> +return 0;
>>> +of_node_put(reset_node);
>>> +
>>> +larb->rst_con = devm_reset_control_get(dev, "larb_rst");

"larb" is just fine as a name: it's clear that this is a reset, as
it's specified as `reset-names = "name"`.

>>
>> Where are the bindings? Why do you add undocumented properties? How
>> possible this passes dtbs_check???
>>
> 
> This is not the new added property in SMI larb DT node.
> It is the reset signal name which is inclued in 'reset-names'.
> Just like this:
> 
> resets = <&imgsys1_dip_nr_rst MT8188_SIM_RST_LARB15>;
> reset-name = 'larb_rst';
> 
> Maybe I can add this name to the 'reset-name' property binding
> description, like this, is this clear for you?
> 
> reset-name:

It's "reset-names" btw.

>      const: larb_rst
>      description: the name of reset signal. SMI driver need to obtain 		
>   the reset controller based on this.
> 
>>
>>> +if (IS_ERR(larb->rst_con))
>>> +return dev_err_probe(dev, PTR_ERR(larb->rst_con),
>>> +     "cannot get larb reset controller\n");
>>> +
>>> +larb->nb.notifier_call = mtk_smi_genpd_callback;
>>> +ret = dev_pm_genpd_add_notifier(dev, &larb->nb);
>>> +if (ret) {
>>> +dev_err(dev, "Failed to add genpd callback %d\n", ret);
>>> +return -EINVAL;
>>> +}
>>> +
>>> +return 0;
>>> +}
>>> +
>>>   static int mtk_smi_larb_probe(struct platform_device *pdev)
>>>   {
>>>   struct mtk_smi_larb *larb;
>>> @@ -538,6 +662,7 @@ static int mtk_smi_larb_probe(struct
>> platform_device *pdev)
>>>   if (!larb)
>>>   return -ENOMEM;
>>>   
>>> +larb->dev = dev;
>>>   larb->larb_gen = of_device_get_match_data(dev);
>>>   larb->base = devm_platform_ioremap_resource(pdev, 0);
>>>   if (IS_ERR(larb->base))
>>> @@ -554,15 +679,29 @@ static int mtk_smi_larb_probe(struct
>> platform_device *pdev)
>>>   if (ret < 0)
>>>   return ret;
>>>   
>>> -pm_runtime_enable(dev);
>>> +/* find sub common to clamp larb for ISP software reset */
>>> +ret = mtk_smi_larb_parse_clamp_info(larb);
>>> +if (ret) {
>>> +dev_err(dev, "Failed to get clamp setting for larb\n");
>>> +goto err_pm_disable;
>>> +}
>>> +
>>> +ret = mtk_smi_larb_parse_reset_info(larb);
>>> +if (ret) {
>>> +dev_err(dev, "Failed to get power setting for larb\n");
>>> +goto err_pm_disable;
>>> +}
>>> +
>>>   platform_set_drvdata(pdev, larb);
>>>   ret = component_add(dev, &mtk_smi_larb_component_ops);
>>>   if (ret)
>>>   goto err_pm_disable;
>>> +
>>> +pm_runtime_enable(dev);
>>> +
>>>   return 0;
>>>   
>>>   err_pm_disable:
>>> -pm_runtime_disable(dev);
>>>   device_link_remove(dev, larb->smi_common_dev);
>>
>> Label asls pm disable. Where is the pm disable?
>>
> 
> Thanks, I will fix it to 'err_link_remove'.
> 

...or you can just use devm_pm_runtime_enable() instead, and not worry
about disabling it on your own.

Regards,
Angelo