[PATCH v2 2/2] arm64: dts: mediatek: mt8395-genio-1200-evk: add support for MUX IT5205

[Macpaul Lin]

Add ITE IT5205FN (TYPEC MUX) under I2C2 bus and configure its properties;
also add references to it5205fn from MT6360 TYPE-C connector for TYPEC
configuration.

Signed-off-by: Fabien Parent <fparent at baylibre.com>
Signed-off-by: Simon Sun <simon.sun at yunjingtech.com>
Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
 .../dts/mediatek/mt8395-genio-1200-evk.dts    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

Changes for v2:
 - This is a new patch in the v2 patch.

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 195e486d9101..57c68d033196 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -229,6 +229,21 @@ &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	it5205fn: typec-mux at 48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+		mode-switch;
+		orientation-switch;
+		status = "okay";
+
+		port {
+			it5205_sbu_ep: endpoint {
+				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
+			};
+		};
+	};
 };
 
 &i2c6 {
@@ -282,6 +297,13 @@ mt6360_ssusb_ep: endpoint {
 							remote-endpoint = <&ssusb_ep>;
 						};
 					};
+
+					port at 2 {
+						reg = <2>;
+						mt6360_ssusb_sbu_ep: endpoint {
+							remote-endpoint = <&it5205_sbu_ep>;
+						};
+					};
 				};
 			};
 		};
-- 
2.45.2