[PATCH 5/6] regulator: Add driver for MediaTek MT6328 PMIC regulators

[Yassine Oudjana]

On Mon, Oct 21 2024 at 15:24:51 +02:00:00, AngeloGioacchino Del Regno 
<angelogioacchino.delregno at collabora.com> wrote:
> Il 18/10/24 10:10, Yassine Oudjana ha scritto:
>> From: Yassine Oudjana <y.oudjana at protonmail.com>
>> 
>> Add a driver for the regulators on the MT6328 PMIC.
>> 
>> Signed-off-by: Yassine Oudjana <y.oudjana at protonmail.com>
>> ---
>>   drivers/regulator/Kconfig                  |   9 +
>>   drivers/regulator/Makefile                 |   1 +
>>   drivers/regulator/mt6328-regulator.c       | 479 
>> +++++++++++++++++++++
>>   include/linux/regulator/mt6328-regulator.h |  49 +++
>>   4 files changed, 538 insertions(+)
>>   create mode 100644 drivers/regulator/mt6328-regulator.c
>>   create mode 100644 include/linux/regulator/mt6328-regulator.h
>> 
>> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
>> index 249933d6388dd..e9b9faff67f3a 100644
>> --- a/drivers/regulator/Kconfig
>> +++ b/drivers/regulator/Kconfig
>> @@ -862,6 +862,15 @@ config REGULATOR_MT6323
>>   	  This driver supports the control of different power rails of 
>> device
>>   	  through regulator interface.
>>   +config REGULATOR_MT6328
>> +	tristate "MediaTek MT6328 PMIC"
>> +	depends on MFD_MT6397
>> +	help
>> +	  Say y here to select this option to enable the power regulator of
>> +	  MediaTek MT6328 PMIC.
>> +	  This driver supports the control of different power rails of 
>> device
>> +	  through regulator interface.
>> +
>>   config REGULATOR_MT6331
>>   	tristate "MediaTek MT6331 PMIC"
>>   	depends on MFD_MT6397
>> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
>> index 9b69546fb3f65..c1a5a44413198 100644
>> --- a/drivers/regulator/Makefile
>> +++ b/drivers/regulator/Makefile
>> @@ -103,6 +103,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
>>   obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
>> +obj-$(CONFIG_REGULATOR_MT6328)	+= mt6328-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6357)	+= mt6357-regulator.o
>> diff --git a/drivers/regulator/mt6328-regulator.c 
>> b/drivers/regulator/mt6328-regulator.c
>> new file mode 100644
>> index 0000000000000..e15a64404f494
>> --- /dev/null
>> +++ b/drivers/regulator/mt6328-regulator.c
>> @@ -0,0 +1,479 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * MediaTek MT6328 regulator driver
>> + * Based on MT6323 driver.
>> + *
>> + * Copyright (c) 2016 MediaTek Inc.
>> + * Copyright (c) 2022 Yassine Oudjana <y.oudjana at protonmail.com>
>> + */
>> +
> 
> ..snip..
> 
>> +/* The array is indexed by id(MT6328_ID_XXX) */
>> +static struct mt6328_regulator_info mt6328_regulators[] = {
>> +	MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
>> +		buck_volt_range1, MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f,
>> +		MT6328_VPA_CON12, MT6328_VPA_CON7),
> 
> Can you please fix the indentation?
> 
> Also, all of those entries do fit in two lines, I checked a couple of 
> those
> and always ended up with less than 90 columns anyway.

I can't seem to fit even the first one in 2 lines in under 90 columns :/
That is unless I don't indent the second line:

	MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, buck_volt_range1,
	MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f, MT6328_VPA_CON12, 
MT6328_VPA_CON7),

Which I don't think is what you meant by fixing the indentation. Can 
you show me an example? With 100 columns on the other hand it seems 
like they should fit.
>