[PATCH v4] thermal/of: support thermal zones w/o trips subnode

[Rafael J. Wysocki]

On Fri, Oct 18, 2024 at 9:31 AM Chen-Yu Tsai <wenst at chromium.org> wrote:
>
> From: Icenowy Zheng <uwu at icenowy.me>
>
> Although the current device tree binding of thermal zones require the
> trips subnode, the binding in kernel v5.15 does not require it, and many
> device trees shipped with the kernel, for example,
> allwinner/sun50i-a64.dtsi and mediatek/mt8183-kukui.dtsi in ARM64, still
> comply to the old binding and contain no trips subnode.
>
> Allow the code to successfully register thermal zones w/o trips subnode
> for DT binding compatibility now.
>
> Furtherly, the inconsistency between DTs and bindings should be resolved
> by either adding empty trips subnode or dropping the trips subnode
> requirement.
>
> Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately")
> Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> [wenst at chromium.org: Reworked logic and kernel log messages]
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>

Reviewed-by: Rafael J. Wysocki <rafael at kernel.org>

> ---
> This patch is based on Krzysztof's cleanup patches
>   - thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init() [1]
>
> Changes since v3:
>   - Set *ntrips = 0 and return NULL from thermal_of_trips_init() if
>     no trip points are found in the device tree (Rafael)
>   - Dropped log level of "no trip points found" message to INFO
>   - Reworded new "failed to find trip points" message to "no trip points
>     found"
>   - Reworded existing "failed to find trip points" message to "failed to
>     parse trip points"
>
> I dropped Mark's reviewed-by because of the new changes.
>
> Changes since v2:
> - Stacked on top of Krzysztof's cleanup patches
>   - thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init() [1]
> - Adjusted to account for eliminated error path
>
> [1] https://lore.kernel.org/all/20241010-b4-cleanup-h-of-node-put-thermal-v4-2-bfbe29ad81f4@linaro.org/
>
> Changes since v1:
> - set *ntrips at beginning of thermal_of_trips_init()
> - Keep goto out_of_node_put in of_get_child_count(trips) == 0 branch
> - Check return value of thermal_of_trips_init(), if it is -ENXIO, print
>   warning and clear |trips| pointer
> - Drop |mask| change, as the variable was removed
>
> ---
>  drivers/thermal/thermal_of.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
> index 93f7c6f8d06d..abafce22c91f 100644
> --- a/drivers/thermal/thermal_of.c
> +++ b/drivers/thermal/thermal_of.c
> @@ -99,14 +99,16 @@ static struct thermal_trip *thermal_of_trips_init(struct device_node *np, int *n
>
>         struct device_node *trips __free(device_node) = of_get_child_by_name(np, "trips");
>         if (!trips) {
> -               pr_err("Failed to find 'trips' node\n");
> -               return ERR_PTR(-EINVAL);
> +               pr_debug("Failed to find 'trips' node\n");
> +               *ntrips = 0;
> +               return NULL;
>         }
>
>         count = of_get_child_count(trips);
>         if (!count) {
> -               pr_err("No trip point defined\n");
> -               return ERR_PTR(-EINVAL);
> +               pr_debug("No trip point defined\n");
> +               *ntrips = 0;
> +               return NULL;
>         }
>
>         struct thermal_trip *tt __free(kfree) = kzalloc(sizeof(*tt) * count, GFP_KERNEL);
> @@ -386,11 +388,14 @@ static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
>
>         trips = thermal_of_trips_init(np, &ntrips);
>         if (IS_ERR(trips)) {
> -               pr_err("Failed to find trip points for %pOFn id=%d\n", sensor, id);
> +               pr_err("Failed to parse trip points for %pOFn id=%d\n", sensor, id);
>                 ret = PTR_ERR(trips);
>                 goto out_of_node_put;
>         }
>
> +       if (!trips)
> +               pr_info("No trip points found for %pOFn id=%d\n", sensor, id);
> +
>         ret = thermal_of_monitor_init(np, &delay, &pdelay);
>         if (ret) {
>                 pr_err("Failed to initialize monitoring delays from %pOFn\n", np);
> --