[PATCH v13 1/3] dt-bindings: display: mediatek: Add OF graph support for board path
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu Oct 17 03:38:07 PDT 2024
The display IPs in MediaTek SoCs support being interconnected with
different instances of DDP IPs (for example, merge0 or merge1) and/or
with different DDP IPs (for example, rdma can be connected with either
color, dpi, dsi, merge, etc), forming a full Display Data Path that
ends with an actual display.
The final display pipeline is effectively board specific, as it does
depend on the display that is attached to it, and eventually on the
sensors supported by the board (for example, Adaptive Ambient Light
would need an Ambient Light Sensor, otherwise it's pointless!), other
than the output type.
Add support for OF graphs to most of the MediaTek DDP (display) bindings
to add flexibility to build custom hardware paths, hence enabling board
specific configuration of the display pipeline and allowing to finally
migrate away from using hardcoded paths.
Please note that - while this commit retains retro-compatibility with
old device trees - it will break the ABI for mediatek,dsi and for
mediatek,dpi for the sake of consistency between the `ports` in all
MediaTek DRM drivers versus DRM bridge drivers as in the previous
binding, MediaTek was using `port` (implicitly, port at 0) as an OUTPUT,
while now the first port is an INPUT, and the second one is an OUTPUT,
which is consistent with other DRM drivers which can be chained to
drm/mediatek.
As for maintainability concerns, I am aware that the old device tree
will not be actively tested anymore, but retrocompatibility breakages
will *not* be more likely to happen in the future because any addition
to the graph (new drivers) will be done only for features present on
newer SoCs, keeping the old ones (and their default pipeline) untouched.
Reviewed-by: Rob Herring (Arm) <robh at kernel.org>
Reviewed-by: Alexandre Mergnat <amergnat at baylibre.com>
Tested-by: Alexandre Mergnat <amergnat at baylibre.com>
Reviewed-by: CK Hu <ck.hu at mediatek.com>
Tested-by: Michael Walle <mwalle at kernel.org> # on kontron-sbc-i1200
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
.../display/mediatek/mediatek,aal.yaml | 40 +++++++++++++++++++
.../display/mediatek/mediatek,ccorr.yaml | 21 ++++++++++
.../display/mediatek/mediatek,color.yaml | 22 ++++++++++
.../display/mediatek/mediatek,dither.yaml | 22 ++++++++++
.../display/mediatek/mediatek,dpi.yaml | 25 +++++++++++-
.../display/mediatek/mediatek,dsc.yaml | 24 +++++++++++
.../display/mediatek/mediatek,dsi.yaml | 27 ++++++++++++-
.../display/mediatek/mediatek,ethdr.yaml | 22 ++++++++++
.../display/mediatek/mediatek,gamma.yaml | 19 +++++++++
.../display/mediatek/mediatek,merge.yaml | 23 +++++++++++
.../display/mediatek/mediatek,od.yaml | 22 ++++++++++
.../display/mediatek/mediatek,ovl-2l.yaml | 22 ++++++++++
.../display/mediatek/mediatek,ovl.yaml | 22 ++++++++++
.../display/mediatek/mediatek,postmask.yaml | 21 ++++++++++
.../display/mediatek/mediatek,rdma.yaml | 22 ++++++++++
.../display/mediatek/mediatek,ufoe.yaml | 21 ++++++++++
16 files changed, 372 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index cf24434854ff..47ddba5c41af 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -62,6 +62,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: AAL input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ AAL output to the next component's input, for example could be one
+ of many gamma, overdrive or other blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
@@ -89,5 +110,24 @@ examples:
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_AAL>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ aal0_in: endpoint {
+ remote-endpoint = <&ccorr0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ aal0_out: endpoint {
+ remote-endpoint = <&gamma0_in>;
+ };
+ };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 9f8366763831..fca8e7bb0cbc 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -57,6 +57,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CCORR input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ CCORR output to the input of the next desired component in the
+ display pipeline, usually only one of the available AAL blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index 7df786bbad20..6160439ce4d7 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -65,6 +65,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: COLOR input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ COLOR output to the input of the next desired component in the
+ display pipeline, for example one of the available CCORR or AAL
+ blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
index 6fceb1f95d2a..abaf27916d13 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -56,6 +56,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DITHER input, usually from a POSTMASK or GAMMA block.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DITHER output to the input of the next desired component in the
+ display pipeline, for example one of the available DSC compressors,
+ DP_INTF, DSI, LVDS or others.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 3a82aec9021c..b567e3d58aa1 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -71,13 +71,34 @@ properties:
Output port node. This port should be connected to the input port of an
attached HDMI, LVDS or DisplayPort encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI output to an HDMI, LVDS or DisplayPort encoder input
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
allOf:
- if:
@@ -100,7 +121,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
- dpi0: dpi at 1401d000 {
+ dpi: dpi at 1401d000 {
compatible = "mediatek,mt8173-dpi";
reg = <0x1401d000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
index 2cbdd9ee449d..846de6c17d93 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -49,6 +49,30 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression input, usually from one of the DITHER
+ or MERGE blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression output to the input of the next desired
+ component in the display pipeline, for example to MERGE, DP_INTF,
+ DPI or DSI.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
index a7aa8fcb0dd1..27ffbccc2a08 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -77,6 +77,26 @@ properties:
Output port node. This port should be connected to the input
port of an attached DSI panel or DSI-to-eDP encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input ports can have multiple endpoints, each of those connects
+ to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI input port, usually from DITHER, DSC or MERGE
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DSI output to an attached DSI panel, or a DSI-to-X encoder chip
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
@@ -86,7 +106,12 @@ required:
- clock-names
- phys
- phy-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
index 677882348ede..98db47894eeb 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -110,6 +110,28 @@ properties:
include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
function block.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: ETHDR input, usually from one of the MERGE blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ ETHDR output to the input of the next desired component in the
+ display pipeline, for example one of the available MERGE blocks,
+ or others.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
index 6823d3ce5049..48542dc7e784 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -65,6 +65,25 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GAMMA input, usually from one of the AAL blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ GAMMA output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER or
+ POSTMASK blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index dae839279950..0de9f64f3f84 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -77,6 +77,29 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA,
+ ETHDR or even from a different MERGE block
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or
+ a different MERGE block, or others.
+
+ required:
+ - port at 0
+ - port at 1
+
resets:
description: reset controller
See Documentation/devicetree/bindings/reset/reset.txt for details.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 831c653caffd..71534febd49c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -38,6 +38,28 @@ properties:
items:
- description: OD Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OD input port, usually from an AAL block
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OD output to the input of the next desired component in the
+ display pipeline, for example one of the available RDMA or
+ other blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
index c7dd0ef02dcf..bacdfe7d08a6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -57,6 +57,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS, VDOSYS or other OVLs
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index d55611c7ce5e..9ea796a033b2 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -75,6 +75,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS or one of multiple VDOSYS
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
index 11fe32e50a59..fb6fe4742624 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -52,6 +52,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: POSTMASK input port, usually from GAMMA
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ POSTMASK output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
index 4cadb245d028..878f676b581f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -87,6 +87,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: RDMA input port, usually from MMSYS, OD or OVL
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ RDMA output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, DPI,
+ DSI, MERGE or UFOE blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 39e3e2d4a0db..61a5e22effbf 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -43,6 +43,27 @@ properties:
items:
- description: UFOe Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: UFOE input, usually from one of the RDMA blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ UFOE output to the input of the next desired component in the
+ display pipeline, usually one of the available DSI blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
--
2.46.1
More information about the Linux-mediatek
mailing list