[PATCH RFC v1 net-next 11/12] bridge: br_vlan_fill_forward_path_mode no _UNTAG_HW for dsa
Eric Woudstra
ericwouds at gmail.com
Sun Oct 13 11:55:07 PDT 2024
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
Now that DEV_PATH_MTK_WDMA is added to nft_dev_path_info() the forward
path is filled also when ending with the mediatek wlan1, info.indev not
NULL now in nft_dev_forward_path(). This results in a direct transmit
instead of a neighbor transmit. This is how it should be, But this fails.
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG is
set when there is a dsa-switch inside the bridge.
Signed-off-by: Eric Woudstra <ericwouds at gmail.com>
---
net/bridge/br_private.h | 1 +
net/bridge/br_vlan.c | 18 +++++++++++++++++-
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 8da7798f9368..7d427214cc7c 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -180,6 +180,7 @@ enum {
BR_VLFLAG_MCAST_ENABLED = BIT(2),
BR_VLFLAG_GLOBAL_MCAST_ENABLED = BIT(3),
BR_VLFLAG_NEIGH_SUPPRESS_ENABLED = BIT(4),
+ BR_VLFLAG_TAGGING_BY_SWITCHDEV = BIT(5),
};
/**
diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
index 1830d7d617cd..b7877724b969 100644
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -3,6 +3,7 @@
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <net/dsa.h>
#include <net/switchdev.h>
#include "br_private.h"
@@ -100,6 +101,19 @@ static void __vlan_flags_commit(struct net_bridge_vlan *v, u16 flags)
__vlan_flags_update(v, flags, true);
}
+static inline bool br_vlan_tagging_by_switchdev(struct net_bridge *br)
+{
+#if IS_ENABLED(CONFIG_NET_DSA)
+ struct net_bridge_port *p;
+
+ list_for_each_entry(p, &br->port_list, list) {
+ if (dsa_user_dev_check(p->dev))
+ return false;
+ }
+#endif
+ return true;
+}
+
static int __vlan_vid_add(struct net_device *dev, struct net_bridge *br,
struct net_bridge_vlan *v, u16 flags,
struct netlink_ext_ack *extack)
@@ -113,6 +127,8 @@ static int __vlan_vid_add(struct net_device *dev, struct net_bridge *br,
if (err == -EOPNOTSUPP)
return vlan_vid_add(dev, br->vlan_proto, v->vid);
v->priv_flags |= BR_VLFLAG_ADDED_BY_SWITCHDEV;
+ if (br_vlan_tagging_by_switchdev(br))
+ v->priv_flags |= BR_VLFLAG_TAGGING_BY_SWITCHDEV;
return err;
}
@@ -1491,7 +1507,7 @@ int br_vlan_fill_forward_path_mode(struct net_bridge *br,
if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG)
path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP;
- else if (v->priv_flags & BR_VLFLAG_ADDED_BY_SWITCHDEV)
+ else if (v->priv_flags & BR_VLFLAG_TAGGING_BY_SWITCHDEV)
path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG_HW;
else
path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG;
--
2.45.2
More information about the Linux-mediatek
mailing list