[PATCH v1 02/10] media: platform: mediatek: add seninf controller

[CK Hu (胡俊光)]

Hi, Shu-hsiang:

On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote:
> Introduces support for the sensor interface in the MediaTek SoC,
> with the focus on CSI and stream control. The key functionalities
> include parameter control, metering and maintaining status information,
> interrupt handling, and debugging. These features ensure effective
> management and debugging of the camera sensor interface hardware.
> 
> Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang at mediatek.com>
> ---
>  .../isp_7x/camsys/mtk_csi_phy_2_0/Makefile    |    5 +
>  .../mtk_csi_phy_2_0/mtk_cam-seninf-cammux.h   |  911 ++++++
>  .../mtk_cam-seninf-csi0-cphy.h                |   69 +
>  .../mtk_cam-seninf-csi0-dphy.h                |  139 +
>  .../mtk_cam-seninf-hw_phy_2_0.c               | 2879 +++++++++++++++++
>  .../mtk_cam-seninf-mipi-rx-ana-cdphy-csi0a.h  |  257 ++
>  .../mtk_cam-seninf-seninf1-csi2.h             |  415 +++
>  .../mtk_cam-seninf-seninf1-mux.h              |  147 +
>  .../mtk_csi_phy_2_0/mtk_cam-seninf-seninf1.h  |   47 +
>  .../mtk_csi_phy_2_0/mtk_cam-seninf-tg1.h      |   49 +
>  .../mtk_csi_phy_2_0/mtk_cam-seninf-top-ctrl.h |   99 +

Move the phy part to phy/mediatek/ folder. You could refer to phy/mediatek/phy-mtk-mipi-csi-0-5.c

Regards,
CK