[PATCH v2] arm64: dts: mediatek: mt8195: Fix dtbs_check error for tphy

[Macpaul Lin]

The u3phy1 node in mt8195.dtsi was triggering a dtbs_check error.
The error message was:
  t-phy at 11e30000: 'power-domains' does not match any of the regexes:
    '^(usb|pcie|sata)-phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fix this issue by dropping 'power-domains' of u3phy1 node.

This is because MediaTek tphy dose not need to add mtcmos.  It is not
necessary to add 'power-domains'. If the power of the tphy is turned off,
it will affect other functions. From the current USB hardware design
perspective, even if mtcmos is added to the phy, it is always on.

Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 -
 1 file changed, 1 deletion(-)

Changes for v2:
 - Add detail description of the tphy design for explaining the reason
   of this change.

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index ade685ed2190..1c6f08dde31c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1920,7 +1920,6 @@ u3phy1: t-phy at 11e30000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0 0x11e30000 0xe00>;
-			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
 			status = "disabled";
 
 			u2port1: usb-phy at 0 {
-- 
2.45.2