[PATCH v3 3/9] arm64: dts: mediatek: mt8188: Add MIPI DSI nodes

[Fei Shao]

Add two MIPI DSI nodes and the associated PHY nodes to support DSI
panels.
Individual board device tree should enable the nodes as needed.

Signed-off-by: Fei Shao <fshao at chromium.org>
---

Changes in v3:
- add the secondary MIPI DSI

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 51 ++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 3cc00a898cc9..d39940ed6f5c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1844,6 +1844,26 @@ pcieport: pcie-phy at 0 {
 			};
 		};
 
+		mipi_tx_config0: dsi-phy at 11c80000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx_config1: dsi-phy at 11c90000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c1: i2c at 11e00000 {
 			compatible = "mediatek,mt8188-i2c";
 			reg = <0 0x11e00000 0 0x1000>,
@@ -2229,10 +2249,41 @@ larb19: smi at 1a010000 {
 			mediatek,smi = <&vdo_smi_common>;
 		};
 
+		disp_dsi0: dsi at 1c008000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx_config0>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_config0>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI0>;
+			status = "disabled";
+		};
+
+		disp_dsi1: dsi at 1c012000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx_config1>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_config1>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI1>;
+			status = "disabled";
+		};
+
 		vdosys0: syscon at 1c01d000 {
 			compatible = "mediatek,mt8188-vdosys0", "syscon";
 			reg = <0 0x1c01d000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>;
 		};
-- 
2.47.0.rc0.187.ge670bccf7e-goog