[PATCH v5 5/6] PCI: mediatek-gen3: Add reset delay in mtk_pcie_en7581_power_up()

[Lorenzo Bianconi]

Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal
causing occasional PCIe link down issues. In order to overcome the
problem, PCIe block is reset using REG_PCI_CONTROL (0x88) and
REG_RESET_CONTROL (0x834) registers available in the clock module
running clk_bulk_prepare_enable in mtk_pcie_en7581_power_up().
In order to make the code more readable, move the wait for the time
needed to complete the PCIe reset from en7581_pci_enable() to
mtk_pcie_en7581_power_up().
Reduce reset timeout from 250ms to the standard PCIE_T_PVPERL_MS value
(100ms) since it has no impact on the driver behavior.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Acked-by: Stephen Boyd <sboyd at kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
 drivers/clk/clk-en7523.c                    | 1 -
 drivers/pci/controller/pcie-mediatek-gen3.c | 7 +++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 22fbea61c3dcc05e63f8fa37e203c62b2a6fe79e..bf9d9594bef8a54316e28e56a1642ecb0562377a 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -393,7 +393,6 @@ static int en7581_pci_enable(struct clk_hw *hw)
 	       REG_PCI_CONTROL_PERSTOUT;
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val | mask, np_base + REG_PCI_CONTROL);
-	msleep(250);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 01e8fde96080fa55f6c23c7d1baab6e22c49fcff..da01e741ff290464d28e172879520dbe0670cc41 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -977,6 +977,13 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 		goto err_clk_prepare_enable;
 	}
 
+	/*
+	 * Airoha EN7581 performs PCIe reset via clk callabacks since it has a
+	 * hw issue with PCIE_PE_RSTB signal. Add wait for the time needed to
+	 * complete the PCIe reset.
+	 */
+	msleep(PCIE_T_PVPERL_MS);
+
 	return 0;
 
 err_clk_prepare_enable:

-- 
2.47.0