[PATCH v11 0/7] platform/chrome: Introduce DT hardware prober
Chen-Yu Tsai
wenst at chromium.org
Tue Nov 26 19:49:16 PST 2024
Hi Wolfram,
On Wed, Nov 6, 2024 at 5:34 PM Chen-Yu Tsai <wenst at chromium.org> wrote:
>
> Hi everyone,
>
> This is v11 of my "of: Introduce hardware prober driver" series.
> v11 adds a missing include of linux/types.h for the |bool| type,
> as reported by Andrey.
>
> To Wolfram:
> Everything is fully reviewed and ready to be merged. There is also
> no need to wait for the end of the merge window if you also merge
> in the immutable regulator tag [1]. Not sure if you want to also
> take the last DT patch though. If that's the case you would likely
> still have to wait for the end of the merge window.
Just checking in. I just wanted to make sure that this is still on
track for v6.13-rc1.
Thanks
ChenYu
> Changes since v10:
> - Added include of linux/types.h for type |bool| in i2c-of-prober.h
>
> The older changelog entries have been moved to the bottom of the cover
> letter.
>
> For the I2C component (touchscreens and trackpads) case from the
> original series, the hardware prober driver finds the particular
> class of device in the device tree, gets its parent I2C adapter,
> and tries to initiate a simple I2C read for each device under that
> I2C bus. When it finds one that responds, it considers that one
> present, marks it as "okay", and returns, letting the driver core
> actually probe the device.
>
> This works fine in most cases since these components are connected
> via a ribbon cable and always have the same resources. The prober
> will also grab these resources and enable them.
>
> The other case, selecting a display panel to use based on the SKU ID
> from the firmware, hit a bit of an issue with fixing the OF graph.
> It has been left out since v3.
>
> Patch 1 adds of_changeset_update_prop_string(), as requested by Rob.
>
> Patch 2 adds for_each_child_of_node_with_prefix(), as suggested by Andy.
>
> Patch 3 implements probing the I2C bus for presence of components as
> a hookable helper function in the I2C core.
>
> Patch 4 implements regulator supply support as a set of simple helpers
> for the I2C component prober.
>
> Patch 5 implements GPIO support for the I2C component prober simple
> helpers.
>
> Patch 6 adds a ChromeOS specific DT hardware prober. This initial
> version targets the Hana Chromebooks, probing its I2C trackpads and
> touchscreens.
>
> Patch 7 modifies the Hana device tree and marks the touchscreens
> and trackpads as "fail-needs-probe", ready for the driver to probe.
>
>
> The regulator parts were merged separately with an immutable tag [1]. Rob
> already gave his Reviewed-by for the OF bits, and I assume he is OK with
> them going through a different branch. So I believe it is fine for
> Wolfram to take all the patch except the last one through the I2C tree.
> The last DTS patch can be merged through the MediaTek tree once the
> driver bits land.
>
>
> Thanks
> ChenYu
>
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git/tag/?h=regulator-of-get-optional
>
> Changes since v9:
> - Picked up review-bys
> - Added inclusion of stddef.h for NULL
> - Added "noautosel" stable tag to the device tree patch
>
> Changes since v8:
> - Link to v8:
> https://lore.kernel.org/all/20241008073430.3992087-1-wenst@chromium.org/
> - Patch "i2c: core: Remove extra space in Makefile" was merged and
> dropped from this version
> - Patch 3 "i2c: Introduce OF component probe function"
> - Added missing include of <linux/kconfig.h> to i2c-of-prober.h
> - Expanded description of i2c_of_probe_ops::enable to mention that
> returning -EPROBE_DEFER is valid (Doug)
> - Reworded descrption of i2c_of_probe_ops::cleanup_early to avoid
> confusion with i2c_of_probe_ops::enable (Doug)
> - Reworked i2c_of_probe_get_i2c_node() to return NULL on failure,
> matching most functions that return |struct device_node *|.
> - Patch 4 "i2c: of-prober: Add simple helpers for regulator support"
> - Picked up Doug's reviewed-by
> - Patch 5 "i2c: of-prober: Add GPIO support to simple helpers"
> - Moved |struct gpio_desc| forward declaration before |struct regulator|
> (Andy)
> - Dropped GPIO descriptor validity check from
> i2c_of_probe_simple_disable_gpio(); GPIO functions check it (Andy)
> - Dropped comment from i2c_of_probe_simple_disable_gpio() (Doug)
> - Reworded comment in i2c_of_probe_simple_cleanup() (Doug)
> - Picked up Doug's reviewed-by
> - Patch 6 "platform/chrome: Introduce device tree hardware prober"
> - Added trailing commas on last field in struct variable declarations
> (Andy)
> - Added macros wrapping chromeos_i2c_probe_dumb_* and
> chromeos_i2c_probe_simple_*_cfg variable declarations (Andy)
> - Split up hw_prober_platforms into one field per line (Andy)
> - Picked up Doug's reviewed-by
> - Patch 7 "arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and
> trackpads as fail"
>
> Changes since v7:
> - Link to v7:
> https://lore.kernel.org/all/20240911072751.365361-1-wenst@chromium.org/
> - Patch 2 "of: base: Add for_each_child_of_node_with_prefix()"
> - Collected Rob's Reviewed-by
> - Patch 3 "i2c: core: Remove extra space in Makefile"
> - Collected Andi's Reviewed-by
> - Patch 4 "i2c: Introduce OF component probe function"
> - Dropped log level of "enabling component" to debug
> - Dropped file name from header file
> - Reverted to __free() cleanup for i2c bus node
> - Corrected "failed-needs-probe" to "fail-needs-probe" in commit message
> - Fixed incorrectly positioned period ('.') in commit message
> - Expanded description of i2c_of_probe_component()
> - Expanded comment explaining check for "available" devices to note that
> if such a device is found then the i2c probe function becomes a no-op
> - Simplified check for "available" devices for-each loop
> - Expanded description of @free_resources_early callback to explicitly
> state that it is not called if no working components are found
> - Dropped !cfg check
> - Replaced "fail" with "fail-needs-probe" in i2c_of_probe_component()
> kernel doc
> - Combined callbacks (.get_resources with .enable; .cleanup with
> .free_resources_late); .free_resources_early renamed to .cleanup_early
> - Patch 5 "i2c: of-prober: Add simple helpers for regulator support"
> - Reworded comment in i2c_of_probe_simple_get_supply() as suggested
> (Andy)
> - Dropped mention of time unit in struct i2c_of_probe_simple_opts
> kernel doc (Andy)
> - Added mention of common GPIO line usages ("enable" or "reset") in I2C
> OF component prober kernel doc (Doug)
> - Added check for non-zero delay before msleep() (Doug)
> - Combined callback helpers (.get_resources with .enable; .cleanup with
> .free_resources_late)
> - Patch 6 "i2c: of-prober: Add GPIO support to simple helpers"
> - Dropped mention of time unit in struct i2c_of_probe_simple_opts
> kernel doc (Andy)
> - Added check for non-zero delay before msleep() (Doug)
> - Simplified GPIO name check and reverse conditional branches (Andy)
> - Added description about the supported power sequence
> - Switched GPIO usage to logical levels (Doug)
> - Changed some variable names and comments to fit
> - Added description of power sequence to struct i2c_of_probe_simple_opts
> (Doug)
> - Added comment saying i2c_of_probe_simple_put_gpiod() might be no-op
> (Doug)
> - Combined callbacks (.get_resources with .enable; .cleanup with
> .free_resources_late); renamed i2c_of_probe_simple_free_res_early() to
> i2c_of_probe_simple_cleanup_early()
> - Patch 7 "platform/chrome: Introduce device tree hardware prober"
> - Corrected Makefile item order
> - Replaced "failed-needs-probe" with "fail-needs-probe" in commit message
> - Added include of "linux/of.h" for of_machine_is_compatible()
> - Switched to simple probe helpers for trackpads on Hana
> - Patch 8 "arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and
> trackpads as fail"
> - Mark touchscreen at 40 as "fail-needs-probe" as well
>
> Changes since v6:
> - Link to v6:
> https://lore.kernel.org/all/20240904090016.2841572-1-wenst@chromium.org/
> - Dropped patch "gpiolib: Add gpio_property_name_length()"
> No longer needed
> - Dropped patch "regulator: Move OF-specific regulator lookup code to of_regulator.c"
> Already merged
> - Patch 2 "of: base: Add for_each_child_of_node_with_prefix()"
> - Changed helper name to "for_each_child_of_node_with_prefix()"
> - Patch 4 "regulator: Add of_regulator_get_optional() for pure DT regulator lookup"
> - Was "regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()"
> - Changed reference [1] to Link: tag
> - Rebased on top of commit 401d078eaf2e ("regulator: of: Refactor
> of_get_*regulator() to decrease indentation")
> - Exported of_regulator_get_optional()
> - Changed commit message to focus on "of_regulator_get_optional()"
> - Dropped change to of_regulator_bulk_get_all()
> - Patch 5 "i2c: core: Remove extra space in Makefile"
> - Collected Andy's Reviewed-by
> - Patch 6 "i2c: Introduce OF component probe function"
> - Correctly replaced for_each_child_of_node_scoped() with
> for_each_child_of_node_with_prefix()
> - Added namespace for exported symbols
> - Made the probe function a framework with hooks
> - Split out a new header file
> - Added MAINTAINERS entry
> - Reworded kernel-doc
> - Dropped usage of __free from i2c_of_probe_component() since error
> path cleanup is needed anyway
> - Patch 7 "i2c: of-prober: Add simple helpers for regulator support"
> - Moved change of of_get_next_child_scoped() to
> of_get_next_child_with_prefix() to previous patch
> - Restructured into helpers for the I2C OF component prober
> - Reduced to only handle one regulator
> - Commit message updated
> - Patch 8 "i2c: of-prober: Add GPIO support to simple helpers"
> - Restructured into helpers for the I2C OF component prober
> - Reduced to only handle one GPIO
> - Set GPIO to input on (failure) cleanup
> - Updated commit message
> - Patch 9 "platform/chrome: Introduce device tree hardware prober"
> - Adapted to new I2C OF prober interface
> - Collected Acked-by tag
>
> Changes since v5:
> - Link to v5:
> https://lore.kernel.org/all/20240822092006.3134096-1-wenst@chromium.org/
> - Patch 1 "of: dynamic: Add of_changeset_update_prop_string"
> - Collected Rob's reviewed-by
> - Patch 2 "of: base: Add for_each_child_of_node_with_prefix_scoped()"
> - New patch
> - Patch 3 "regulator: Move OF-specific regulator lookup code to of_regulator.c"
> - Fix kerneldoc format of of_regulator_dev_lookup()
> - Fix stub compile error for !CONFIG_OF in drivers/regulator/internal.h
> - Patch 4 "regulator: Split up _regulator_get()"
> - Fixed kerneldoc "Return" section format for _regulator_get_common()
> - Slightly reworded return value description
> - Patch 5 "regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()"
> - Used "dev_of_node(dev)" instead of "dev->of_node"
> - Replaced "dev_printk" with "dev_printk()" in kerneldoc mentions
> - Fixed kerneldoc "Return" section format for of_regulator_get_optional()
> - Fix @np parameter name in of_regulator_dev_lookup() kerneldoc
> - Patch 6 "gpiolib: Add gpio_property_name_length()"
> - Changed function name to "gpio_get_property_name_length()"
> - Changed argument name to "propname"
> - Clarified return value for "*-<GPIO suffix>" case
> - Reworked according to Andy's suggestion
> - Added stub function
> - Patch 7 "i2c: core: Remove extra space in Makefile"
> - New patch
> - Patch 8 "i2c: Introduce OF component probe function"
> - Fixed indent in Makefile
> - Split regulator and GPIO TODO items
> - Reversed final conditional in i2c_of_probe_enable_node()
> - Patch 9 "i2c: of-prober: Add regulator support"
> - Split of_regulator_bulk_get_all() return value check and explain
> "ret == 0" case
> - Switched to of_get_next_child_with_prefix_scoped() where applicable
> - Used krealloc_array() instead of directly calculating size
> - copy whole regulator array in one memcpy() call
> - Drop "0" from struct zeroing initializer
> - Split out regulator helper from i2c_of_probe_enable_res() to keep
> code cleaner when combined with the next patch
> - Added options for customizing power sequencing delay
> - Rename i2c_of_probe_get_regulator() to i2c_of_probe_get_regulators()
> - Add i2c_of_probe_free_regulator() helper
> - Patch 10 "i2c: of-prober: Add GPIO support"
> - Renamed "con" to "propname" in i2c_of_probe_get_gpiod()
> - Copy string first and check return value of strscpy() for overflow in
> i2c_of_probe_get_gpiod()
> - Add parenthesis around "enable" and "reset" GPIO names in comments
> - Split resource count debug message into two separate lines
> - Split out GPIO helper from i2c_of_probe_enable_res() to keep code
> cleaner following the previous patch
> - Adopted options for customizing power sequencing delay following
> previous patch
> - Patch 11 "platform/chrome: Introduce device tree hardware prober"
> - Adapt to new i2c_of_probe_component() parameters
> - Patch 12 "arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and
> trackpads as fail"
> - None
>
> See v5 cover letter for previous change logs.
>
> Chen-Yu Tsai (7):
> of: dynamic: Add of_changeset_update_prop_string
> of: base: Add for_each_child_of_node_with_prefix()
> i2c: Introduce OF component probe function
> i2c: of-prober: Add simple helpers for regulator support
> i2c: of-prober: Add GPIO support to simple helpers
> platform/chrome: Introduce device tree hardware prober
> arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads
> as fail
>
> MAINTAINERS | 8 +
> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 14 +
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 +-
> drivers/i2c/Makefile | 1 +
> drivers/i2c/i2c-core-of-prober.c | 415 ++++++++++++++++++
> drivers/of/base.c | 35 ++
> drivers/of/dynamic.c | 44 ++
> drivers/platform/chrome/Kconfig | 11 +
> drivers/platform/chrome/Makefile | 1 +
> .../platform/chrome/chromeos_of_hw_prober.c | 154 +++++++
> include/linux/i2c-of-prober.h | 140 ++++++
> include/linux/of.h | 13 +
> 12 files changed, 838 insertions(+), 2 deletions(-)
> create mode 100644 drivers/i2c/i2c-core-of-prober.c
> create mode 100644 drivers/platform/chrome/chromeos_of_hw_prober.c
> create mode 100644 include/linux/i2c-of-prober.h
>
> --
> 2.47.0.199.ga7371fff76-goog
>
More information about the Linux-mediatek
mailing list