[PATCH AUTOSEL 6.12 103/107] Bluetooth: btusb: Add 3 HWIDs for MT7925

[Sasha Levin]

From: Jiande Lu <jiande.lu at mediatek.com>

[ Upstream commit de7dcf9d1df4b0009735756d0a2adff09c3f21d4 ]

Add below HWIDs for MediaTek MT7925 USB Bluetooth chip.
VID 0x0489, PID 0xe14f
VID 0x0489, PID 0xe150
VID 0x0489, PID 0xe151

Patch has been tested successfully and controller is recognized
device pair successfully.

MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

Signed-off-by: Jiande Lu <jiande.lu at mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz at intel.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/bluetooth/btusb.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2a90033c014b7..0dad2ac5914f4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -654,6 +654,12 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |
-- 
2.43.0