[PATCH v4 5/7] drm/bridge: lt9611: switch to using the DRM HDMI codec framework
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Nov 21 16:47:35 PST 2024
Make the Lontium LT9611 DSI-to-HDMI bridge driver use the DRM HDMI Codec
framework. This enables programming of Audio InfoFrames using the HDMI
Connector interface and also enables support for the missing features,
including the ELD retrieval and better hotplug support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/bridge/lontium-lt9611.c | 171 +++++++++++++-------------------
1 file changed, 69 insertions(+), 102 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 6bc1b2476847c3bccbbf9874bb384c1f60674da6..f3ac67440a941327308ddf1fbb77744c6a8fe42e 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -45,7 +45,6 @@ struct lt9611 {
struct device_node *dsi1_node;
struct mipi_dsi_device *dsi0;
struct mipi_dsi_device *dsi1;
- struct platform_device *audio_pdev;
bool ac_mode;
@@ -866,6 +865,10 @@ static int lt9611_hdmi_clear_infoframe(struct drm_bridge *bridge,
unsigned int mask;
switch (type) {
+ case HDMI_INFOFRAME_TYPE_AUDIO:
+ mask = LT9611_INFOFRAME_AUDIO;
+ break;
+
case HDMI_INFOFRAME_TYPE_AVI:
mask = LT9611_INFOFRAME_AVI;
break;
@@ -899,6 +902,11 @@ static int lt9611_hdmi_write_infoframe(struct drm_bridge *bridge,
int i;
switch (type) {
+ case HDMI_INFOFRAME_TYPE_AUDIO:
+ mask = LT9611_INFOFRAME_AUDIO;
+ addr = 0x84b2;
+ break;
+
case HDMI_INFOFRAME_TYPE_AVI:
mask = LT9611_INFOFRAME_AVI;
addr = 0x8440;
@@ -942,6 +950,55 @@ lt9611_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge,
return MODE_OK;
}
+static int lt9611_hdmi_codec_audio_startup(struct drm_connector *connector,
+ struct drm_bridge *bridge)
+{
+ struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+
+ regmap_write(lt9611->regmap, 0x82d6, 0x8c);
+ regmap_write(lt9611->regmap, 0x82d7, 0x04);
+
+ regmap_write(lt9611->regmap, 0x8406, 0x08);
+ regmap_write(lt9611->regmap, 0x8407, 0x10);
+
+ regmap_write(lt9611->regmap, 0x8434, 0xd5);
+
+ return 0;
+}
+
+static int lt9611_hdmi_codec_prepare(struct drm_connector *connector,
+ struct drm_bridge *bridge,
+ struct hdmi_codec_daifmt *fmt,
+ struct hdmi_codec_params *hparms)
+{
+ struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+
+ if (hparms->sample_rate == 48000)
+ regmap_write(lt9611->regmap, 0x840f, 0x2b);
+ else if (hparms->sample_rate == 96000)
+ regmap_write(lt9611->regmap, 0x840f, 0xab);
+ else
+ return -EINVAL;
+
+ regmap_write(lt9611->regmap, 0x8435, 0x00);
+ regmap_write(lt9611->regmap, 0x8436, 0x18);
+ regmap_write(lt9611->regmap, 0x8437, 0x00);
+
+ return drm_atomic_helper_connector_hdmi_update_audio_infoframe(connector,
+ &hparms->cea);
+}
+
+static void lt9611_hdmi_codec_audio_shutdown(struct drm_connector *connector,
+ struct drm_bridge *bridge)
+{
+ struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+
+ drm_atomic_helper_connector_hdmi_clear_audio_infoframe(connector);
+
+ regmap_write(lt9611->regmap, 0x8406, 0x00);
+ regmap_write(lt9611->regmap, 0x8407, 0x00);
+}
+
static const struct drm_bridge_funcs lt9611_bridge_funcs = {
.attach = lt9611_bridge_attach,
.mode_valid = lt9611_bridge_mode_valid,
@@ -962,6 +1019,10 @@ static const struct drm_bridge_funcs lt9611_bridge_funcs = {
.hdmi_tmds_char_rate_valid = lt9611_hdmi_tmds_char_rate_valid,
.hdmi_write_infoframe = lt9611_hdmi_write_infoframe,
.hdmi_clear_infoframe = lt9611_hdmi_clear_infoframe,
+
+ .hdmi_codec_audio_startup = lt9611_hdmi_codec_audio_startup,
+ .hdmi_codec_prepare = lt9611_hdmi_codec_prepare,
+ .hdmi_codec_audio_shutdown = lt9611_hdmi_codec_audio_shutdown,
};
static int lt9611_parse_dt(struct device *dev,
@@ -1015,102 +1076,6 @@ static int lt9611_read_device_rev(struct lt9611 *lt9611)
return ret;
}
-static int lt9611_hdmi_hw_params(struct device *dev, void *data,
- struct hdmi_codec_daifmt *fmt,
- struct hdmi_codec_params *hparms)
-{
- struct lt9611 *lt9611 = data;
-
- if (hparms->sample_rate == 48000)
- regmap_write(lt9611->regmap, 0x840f, 0x2b);
- else if (hparms->sample_rate == 96000)
- regmap_write(lt9611->regmap, 0x840f, 0xab);
- else
- return -EINVAL;
-
- regmap_write(lt9611->regmap, 0x8435, 0x00);
- regmap_write(lt9611->regmap, 0x8436, 0x18);
- regmap_write(lt9611->regmap, 0x8437, 0x00);
-
- return 0;
-}
-
-static int lt9611_audio_startup(struct device *dev, void *data)
-{
- struct lt9611 *lt9611 = data;
-
- regmap_write(lt9611->regmap, 0x82d6, 0x8c);
- regmap_write(lt9611->regmap, 0x82d7, 0x04);
-
- regmap_write(lt9611->regmap, 0x8406, 0x08);
- regmap_write(lt9611->regmap, 0x8407, 0x10);
-
- regmap_write(lt9611->regmap, 0x8434, 0xd5);
-
- return 0;
-}
-
-static void lt9611_audio_shutdown(struct device *dev, void *data)
-{
- struct lt9611 *lt9611 = data;
-
- regmap_write(lt9611->regmap, 0x8406, 0x00);
- regmap_write(lt9611->regmap, 0x8407, 0x00);
-}
-
-static int lt9611_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
- struct device_node *endpoint,
- void *data)
-{
- struct of_endpoint of_ep;
- int ret;
-
- ret = of_graph_parse_endpoint(endpoint, &of_ep);
- if (ret < 0)
- return ret;
-
- /*
- * HDMI sound should be located as reg = <2>
- * Then, it is sound port 0
- */
- if (of_ep.port == 2)
- return 0;
-
- return -EINVAL;
-}
-
-static const struct hdmi_codec_ops lt9611_codec_ops = {
- .hw_params = lt9611_hdmi_hw_params,
- .audio_shutdown = lt9611_audio_shutdown,
- .audio_startup = lt9611_audio_startup,
- .get_dai_id = lt9611_hdmi_i2s_get_dai_id,
-};
-
-static struct hdmi_codec_pdata codec_data = {
- .ops = <9611_codec_ops,
- .max_i2s_channels = 8,
- .i2s = 1,
-};
-
-static int lt9611_audio_init(struct device *dev, struct lt9611 *lt9611)
-{
- codec_data.data = lt9611;
- lt9611->audio_pdev =
- platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
- PLATFORM_DEVID_AUTO,
- &codec_data, sizeof(codec_data));
-
- return PTR_ERR_OR_ZERO(lt9611->audio_pdev);
-}
-
-static void lt9611_audio_exit(struct lt9611 *lt9611)
-{
- if (lt9611->audio_pdev) {
- platform_device_unregister(lt9611->audio_pdev);
- lt9611->audio_pdev = NULL;
- }
-}
-
static int lt9611_probe(struct i2c_client *client)
{
struct lt9611 *lt9611;
@@ -1174,6 +1139,9 @@ static int lt9611_probe(struct i2c_client *client)
i2c_set_clientdata(client, lt9611);
+ /* Disable Audio InfoFrame, enabled by default */
+ regmap_update_bits(lt9611->regmap, 0x843d, LT9611_INFOFRAME_AUDIO, 0);
+
lt9611->bridge.funcs = <9611_bridge_funcs;
lt9611->bridge.of_node = client->dev.of_node;
lt9611->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID |
@@ -1182,6 +1150,10 @@ static int lt9611_probe(struct i2c_client *client)
lt9611->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
lt9611->bridge.vendor = "Lontium";
lt9611->bridge.product = "LT9611";
+ lt9611->bridge.hdmi_codec_max_i2s_channels = 8;
+ lt9611->bridge.hdmi_codec_i2s = 1;
+ lt9611->bridge.hdmi_codec_dev = dev;
+ lt9611->bridge.hdmi_codec_dai_port = 2;
drm_bridge_add(<9611->bridge);
@@ -1203,10 +1175,6 @@ static int lt9611_probe(struct i2c_client *client)
lt9611_enable_hpd_interrupts(lt9611);
- ret = lt9611_audio_init(dev, lt9611);
- if (ret)
- goto err_remove_bridge;
-
return 0;
err_remove_bridge:
@@ -1227,7 +1195,6 @@ static void lt9611_remove(struct i2c_client *client)
struct lt9611 *lt9611 = i2c_get_clientdata(client);
disable_irq(client->irq);
- lt9611_audio_exit(lt9611);
drm_bridge_remove(<9611->bridge);
regulator_bulk_disable(ARRAY_SIZE(lt9611->supplies), lt9611->supplies);
--
2.39.5
More information about the Linux-mediatek
mailing list