[PATCH v3 6/6] PCI: mediatek-gen3: rely on msleep() in mtk_pcie_en7581_power_up()

[Lorenzo Bianconi]

Since mtk_pcie_en7581_power_up() runs in non-atomic context, rely on
msleep() routine instead of mdelay().

Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 795f134e1970c504e8d9588c09a9c3ff51e5397e..aaec0cb6cc1c016d049e8a88148870de560b9ce2 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -926,7 +926,7 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	 * Wait for the time needed to complete the bulk assert in
 	 * mtk_pcie_setup for EN7581 SoC.
 	 */
-	mdelay(PCIE_EN7581_RESET_TIME_MS);
+	msleep(PCIE_EN7581_RESET_TIME_MS);
 
 	/*
 	 * Unlike the MediaTek controllers, the Airoha EN7581 requires PHY
@@ -954,7 +954,7 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	 * Wait for the time needed to complete the bulk de-assert above.
 	 * This time is specific for EN7581 SoC.
 	 */
-	mdelay(PCIE_EN7581_RESET_TIME_MS);
+	msleep(PCIE_EN7581_RESET_TIME_MS);
 
 	/* MAC power on and enable transaction layer clocks */
 	reset_control_deassert(pcie->mac_reset);

-- 
2.47.0