[PATCH v2 4/4] PCI: mediatek-gen3: Add comment about initialization order in mtk_pcie_en7581_power_up()

[Lorenzo Bianconi]

Add a comment in mtk_pcie_en7581_power_up() to clarify, unlike MediaTek
PCIe controller, the Airoha EN7581 requires PHY initialization and
power-on before PHY reset deassert.

Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 1ad93d2407810ba873d9a16da96208b3cc0c3011..c9981013e59d18ccd3294acdcbd536dd95a0e436 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -884,6 +884,10 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	 */
 	mdelay(PCIE_EN7581_RESET_TIME_MS);
 
+	/*
+	 * Unlike the MediaTek controllers, the Airoha EN7581 requires PHY
+	 * initialization and power-on before PHY reset deassert.
+	 */
 	err = phy_init(pcie->phy);
 	if (err) {
 		dev_err(dev, "failed to initialize PHY\n");

-- 
2.47.0