[PATCH 3/3] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()

[lorenzo at kernel.org]

> On Fri, Nov 08, 2024 at 09:39:41AM +0100, lorenzo at kernel.org wrote:
> > > On Thu, 2024-11-07 at 17:08 +0100, Lorenzo Bianconi wrote:
> > > > > On Thu, Nov 07, 2024 at 02:50:55PM +0100, Lorenzo Bianconi wrote:
> > > > > > In order to make the code more readable, move phy and mac
> > > > > > reset lines assert/de-assert configuration in .power_up
> > > > > > callback (mtk_pcie_en7581_power_up/mtk_pcie_power_up).
> 
> > > > > > +	/*
> > > > > > +	 * The controller may have been left out of reset by the
> > > > > > bootloader
> > > > > > +	 * so make sure that we get a clean start by asserting resets
> > > > > > here.
> > > > > > +	 */
> > > > > > +	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
> > > > > > +				  pcie->phy_resets);
> > > > > > +	reset_control_assert(pcie->mac_reset);
> > > > > > +	usleep_range(10, 20);
> > > > > 
> > > > > Unrelated to this patch, but since you're moving it, do you
> > > > > know what this delay is for?  Can we add a #define and a spec
> > > > > citation for it?
> > > > 
> > > > I am not sure about it, this was already there.  @Jianjun Wang:
> > > > any input on it?
> > > 
> > > This delay is used to ensure the reset is effective. A delay of
> > > 10us should be sufficient in this scenario.
> > 
> > ack, so we can introduce a marco like:
> > 
> > #define PCIE_RESET_TIME_US	10
> > ...
> > 
> > usleep_range(PCIE_RESET_TIME_US, 2 * PCIE_RESET_TIME_US);
> 
> Unless this corresponds to a value specified by the PCIe base spec or
> CEM spec, this macro should be internal to pcie-mediatek-gen3.c.

My plan is to add it in pcie-mediatek-gen3.c. Do you think PCIE_RESET_TIME_US
is too generic?

Regards,
Lorenzo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20241108/79129ac3/attachment.sig>