[PATCH v2 1/2] watchdog: mediatek: Fix mtk_wdt_restart

[Guenter Roeck]

On 11/6/24 02:47, Yassine Oudjana wrote:
> Clear the IRQ enable bit of WDT_MODE before asserting software reset
> in order to make TOPRGU issue a system reset signal instead of an IRQ.
> 
> Fixes: a44a45536f7b ("watchdog: Add driver for Mediatek watchdog")
> Signed-off-by: Yassine Oudjana <y.oudjana at protonmail.com>

Reviewed-by: Guenter Roeck <linux at roeck-us.net>

> ---
>   drivers/watchdog/mtk_wdt.c | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index c35f85ce8d69c..e2d7a57d6ea2e 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -225,9 +225,15 @@ static int mtk_wdt_restart(struct watchdog_device *wdt_dev,
>   {
>   	struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
>   	void __iomem *wdt_base;
> +	u32 reg;
>   
>   	wdt_base = mtk_wdt->wdt_base;
>   
> +	/* Enable reset in order to issue a system reset instead of an IRQ */
> +	reg = readl(wdt_base + WDT_MODE);
> +	reg &= ~WDT_MODE_IRQ_EN;
> +	writel(reg | WDT_MODE_KEY, wdt_base + WDT_MODE);
> +
>   	while (1) {
>   		writel(WDT_SWRST_KEY, wdt_base + WDT_SWRST);
>   		mdelay(5);