[PATCH v14] thermal/drivers/mediatek/auxadc_thermal: expose all thermal sensors
Chen-Yu Tsai
wenst at chromium.org
Fri Nov 1 01:29:39 PDT 2024
On Fri, Oct 25, 2024 at 9:16 PM Hsin-Te Yuan <yuanhsinte at chromium.org> wrote:
>
> From: James Lo <james.lo at mediatek.com>
>
> Previously, the driver only supported reading the temperature from all
> sensors and returning the maximum value. This update adds another
> get_temp ops to support reading the temperature from each sensor
> separately.
>
> Especially, some thermal zones registered by this patch are needed by
> MT8183 since those thermal zones are necessary for mtk-svs driver.
>
> Signed-off-by: Michael Kao <michael.kao at mediatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> Signed-off-by: Ben Tseng <ben.tseng at mediatek.com>
> Signed-off-by: James Lo <james.lo at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> Signed-off-by: Hsin-Te Yuan <yuanhsinte at chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
> Changes in v14:
> - Remove redundant error message.
> - Link to v13: https://lore.kernel.org/r/20241025-auxadc_thermal-v13-1-a5231c52dccb@chromium.org
>
> Changes in v13:
> - Make subject and commit message more clear.
> - Make error message more clear.
> - Link to v12: https://lore.kernel.org/r/20241016-auxadc_thermal-v12-1-c0433e9f61af@chromium.org
>
> Changes in v12:
> - Remove unnecessary check and unused variable assignment in mtk_read_sensor_temp.
> - Add more about what this patch achieves in the commit message.
> - Link to v11: https://lore.kernel.org/r/20240809-auxadc_thermal-v11-1-af36cc74f3a3@chromium.org
>
> Changes in V11:
> - Rebase on kernel v6.11-rc2
> - Use mtk_thermal_temp_is_valid in mtk_read_sensor_temp just like
> mtk_thermal_bank_temperature
> - Change the error handling of devm_thermal_of_zone_register return
> value
> - link to V10: https://lore.kernel.org/lkml/20220519101044.16765-1-james.lo@mediatek.com/
>
> Changes in V10:
> - Rebase to kernel-v5.18-rc7
> - Resend
>
> Changes in V9:
> - Rebase to kernel-v5.14-rc1
> - Bind raw_to_mcelsius_v1 or raw_to_mcelsius_v2 to compatible
> data of struct mtk_thermal_data
> - Remove duplicate struct 'mtk_thermal_bank'
> - Remove unnecessary if condition check
> - Return error if any thermal zone fail to register
>
> Changes in V8:
> - Rebase to kernel-v5.13-rc1
> - Resend
>
> Changes in v7:
> - Fix build error in v6.
>
> Changes in v6:
> - Rebase to kernel-5.11-rc1.
> - [1/3]
> - add interrupts property.
> - [2/3]
> - add the Tested-by in the commit message.
> - [3/3]
> - use the mt->conf->msr[id] instead of conf->msr[id] in the
> _get_sensor_temp and mtk_thermal_bank_temperature.
> - remove the redundant space in _get_sensor_temp and
> mtk_read_sensor_temp.
> - change kmalloc to dev_kmalloc in mtk_thermal_probe.
>
> Changes in v5:
> - Rebase to kernel-5.9-rc1.
> - Revise the title of cover letter.
> - Drop "[v4,7/7] thermal: mediatek: use spinlock to protect PTPCORESEL"
> - [2/2]
> - Add the judgement to the version of raw_to_mcelsius.
>
> Changes in v4:
> - Rebase to kernel-5.6-rc1.
> - [1/7]
> - Squash thermal zone settings in the dtsi from [v3,5/8]
> arm64: dts: mt8183: Increase polling frequency for CPU thermal zone.
> - Remove the property of interrupts and mediatek,hw-reset-temp.
> - [2/7]
> - Correct commit message.
> - [4/7]
> - Change the target temperature to the 80C and change the commit message.
> - [6/7]
> - Adjust newline alignment.
> - Fix the judgement on the return value of registering thermal zone.
>
> Changes in v3:
> - Rebase to kernel-5.5-rc1.
> - [1/8]
> - Update sustainable power of cpu, tzts1~5 and tztsABB.
> - [7/8]
> - Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
> in dts, which is normal for mt8173, so prompt a warning here instead of
> failing.
>
> Return -EAGAIN instead of -EACCESS on the first read of sensor that
> often are bogus values. This can avoid following warning on boot:
>
> thermal thermal_zone6: failed to read out thermal zone (-13)
>
> Changes in v2:
> - [1/8]
> - Add the sustainable-power,trips,cooling-maps to the tzts1~tztsABB.
> - [4/8]
> - Add the min opp of cpu throttle.
> ---
>
> ---
> drivers/thermal/mediatek/auxadc_thermal.c | 70 +++++++++++++++++++++++++++----
> 1 file changed, 62 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
> index 9ee2e7283435acfcbb1a956303b6122a08affecc..9a9079d559a3abe9e3823f744d4c9a159a8666bd 100644
> --- a/drivers/thermal/mediatek/auxadc_thermal.c
> +++ b/drivers/thermal/mediatek/auxadc_thermal.c
> @@ -847,7 +847,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
>
> static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> {
> - struct mtk_thermal *mt = thermal_zone_device_priv(tz);
> + struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
> + struct mtk_thermal *mt = bank->mt;
> int i;
> int tempmax = INT_MIN;
>
> @@ -866,10 +867,41 @@ static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> return 0;
> }
>
> +static int mtk_read_sensor_temp(struct thermal_zone_device *tz, int *temperature)
> +{
> + struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
> + struct mtk_thermal *mt = bank->mt;
> + const struct mtk_thermal_data *conf = mt->conf;
> + int id = bank->id - 1;
> + int temp = INT_MIN;
> + u32 raw;
> +
> + raw = readl(mt->thermal_base + conf->msr[id]);
> +
> + temp = mt->raw_to_mcelsius(mt, id, raw);
> +
> + /*
> + * The first read of a sensor often contains very high bogus
> + * temperature value. Filter these out so that the system does
> + * not immediately shut down.
> + */
> +
> + if (unlikely(!mtk_thermal_temp_is_valid(temp)))
> + return -EAGAIN;
> +
> + *temperature = temp;
> +
> + return 0;
> +}
> +
> static const struct thermal_zone_device_ops mtk_thermal_ops = {
> .get_temp = mtk_read_temp,
> };
>
> +static const struct thermal_zone_device_ops mtk_thermal_sensor_ops = {
> + .get_temp = mtk_read_sensor_temp,
> +};
> +
> static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
> u32 apmixed_phys_base, u32 auxadc_phys_base,
> int ctrl_id)
> @@ -1199,6 +1231,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> u64 auxadc_phys_base, apmixed_phys_base;
> struct thermal_zone_device *tzdev;
> void __iomem *apmixed_base, *auxadc_base;
> + struct mtk_thermal_bank *tz;
>
> mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
> if (!mt)
> @@ -1285,14 +1318,35 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> mtk_thermal_init_bank(mt, i, apmixed_phys_base,
> auxadc_phys_base, ctrl_id);
>
> - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
> - &mtk_thermal_ops);
> - if (IS_ERR(tzdev))
> - return PTR_ERR(tzdev);
> + for (i = 0; i <= mt->conf->num_sensors; i++) {
> + tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
> + if (!tz)
> + return -ENOMEM;
> +
> + tz->mt = mt;
> + tz->id = i;
> +
> + tzdev = devm_thermal_of_zone_register(&pdev->dev, i,
> + tz, (i == 0) ?
> + &mtk_thermal_ops
> + : &mtk_thermal_sensor_ops);
Nit: I think the ':' should be at the end of the previous line?
> +
> + if (IS_ERR(tzdev)) {
> + ret = PTR_ERR(tzdev);
> + if (ret == -ENODEV) {
> + dev_warn(&pdev->dev,
> + "Can't find thermal zone for sensor %d; sensor skipped.\n", i);
> + continue;
> + }
> + return dev_err_probe(&pdev->dev, ret,
> + "Failed to register thermal zone %d.\n", i);
This section could probably be slightly simplified to:
if (PTR_ERR(tzdev) == -ENODEV) {
dev_warn(...);
continue;
}
return dev_err_cast_probe(&p-dev->dev, tzdev, ...);
I don't think these nitpicks warrant a new revision though.
ChenYu
> + }
>
> - ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
> - if (ret)
> - dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
> + ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
> + if (ret)
> + dev_warn(&pdev->dev,
> + "Sensor %d: Error in thermal_add_hwmon_sysfs: %d\n", i, ret);
> + }
>
> return 0;
> }
>
> ---
> base-commit: b589839414be04b2b37e4bf6f84af576c99faf64
> change-id: 20240809-auxadc_thermal-9be338ec8b1c
>
> Best regards,
> --
> Hsin-Te Yuan <yuanhsinte at chromium.org>
>
>
More information about the Linux-mediatek
mailing list