[PATCH v3 00/15] Mediatek thermal sensor driver support for MT8186 and MT8188

[Julien Panis]

On 4/23/24 11:22, AngeloGioacchino Del Regno wrote:
> Il 02/04/24 05:25, Nicolas Pitre ha scritto:
>> This is a bunch of patches to support the MT8186 and MT8188 thermal
>> sensor configurations. Several changes are needed to cope with oddities
>> these SOCs implement.
>>
>> All values (calibration data offsets, etc.) were lifted and adapted from
>> the vendor driver source code.
>>
>
> I picked patches 7 and 12 (and also fixed them) introducing the nodes for the
> LVTS controllers, but will not pick 9 and 15, as they're either missing thermal
> zones and/or using the wrong names; let's wait for the next cycle for those, as
> I will also be able to add the SVS on top (needs a bit of time for testing),
> getting both SoCs complete on the LVTS side, without rushing.
>
> Cheers,
> Angelo
>

Hello Angelo.

I took over Nico's work, so I might have missed a few things, but I'm
a little bit confused with patches 7 and 13 (you wrote '12' but meant
'13' I guess, didn't you ?).

It seems to me that patches 7 and 13 were applied in next-20240503
(f5bcf8ab0950 and d3dbc472ac66). But I don't find them any more in
next-20240520. It's likely that I don't understand well the process, but
I prefer being sure...Should I resend them in next series ?

Just a comment about d3dbc472ac66. There's a typo error, I think:
nvmem-cell-names = "lvts-calib-data1";
...should be replaced with
nvmem-cell-names = "lvts-calib-data-1";
...according to the related yaml.

Julien