[RFC v1 5/5] arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Tue May 7 06:35:12 PDT 2024
Il 06/05/24 18:00, Frank Wunderlich ha scritto:
> Hi
>
> Thanks for review.
>
> Am 6. Mai 2024 14:48:59 MESZ schrieb AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>:
>> Il 05/05/24 18:45, Frank Wunderlich ha scritto:
>>> From: Frank Wunderlich <frank-w at public-files.de>
>>>
>>> Add device Tree for Bananapi R3 Mini SBC.
>>>
>>> Co-developed-by: Eric Woudstra <ericwouds at gmail.com>
>>> Signed-off-by: Eric Woudstra <ericwouds at gmail.com>
>>> Co-developed-by: Tianling Shen <cnsztl at gmail.com>
>>> Signed-off-by: Tianling Shen <cnsztl at gmail.com>
>>> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
>>> ---
>>> arch/arm64/boot/dts/mediatek/Makefile | 1 +
>>> .../mediatek/mt7986a-bananapi-bpi-r3-mini.dts | 486 ++++++++++++++++++
>>> 2 files changed, 487 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>>> index 37b4ca3a87c9..1763b001ab06 100644
>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>>> @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
>>> new file mode 100644
>>> index 000000000000..c764b4dc4752
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
>>> @@ -0,0 +1,486 @@
>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>>> +/*
>>> + * Copyright (C) 2021 MediaTek Inc.
>>> + * Authors: Frank Wunderlich <frank-w at public-files.de>
>>> + * Eric Woudstra <ericwouds at gmail.com>
>>> + * Tianling Shen <cnsztl at immortalwrt.org>
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/input/input.h>
>>> +#include <dt-bindings/leds/common.h>
>>> +#include <dt-bindings/pinctrl/mt65xx.h>
>>> +
>>> +#include "mt7986a.dtsi"
>>> +
>>> +/ {
>>> + model = "Bananapi BPI-R3 Mini";
>>> + chassis-type = "embedded";
>>> + compatible = "bananapi,bpi-r3mini", "mediatek,mt7986a";
>>> +
>>> + aliases {
>>> + serial0 = &uart0;
>>> + ethernet0 = &gmac0;
>>> + ethernet1 = &gmac1;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +
>>> + dcin: regulator-12vd {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "12vd";
>>> + regulator-min-microvolt = <12000000>;
>>> + regulator-max-microvolt = <12000000>;
>>> + regulator-boot-on;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + fan: pwm-fan {
>>> + compatible = "pwm-fan";
>>> + #cooling-cells = <2>;
>>> + /* cooling level (0, 1, 2) - pwm inverted */
>>> + cooling-levels = <255 96 0>;
>>
>> Did you try to actually invert the PWM?
>>
>> Look for PWM_POLARITY_INVERTED ;-)
>
> Mtk pwm driver does not support it
>
> https://elixir.bootlin.com/linux/latest/source/drivers/pwm/pwm-mediatek.c#L211
>
You're right, sorry - I confused the general purpose PWM controller with the
rather specific DISP_PWM controller (which does support polarity inversion).
It's good - but I'd appreciate if you can please add a comment stating that
the PWM values are inverted in SW because the controller does *not* support
polarity inversion... so that next time someone looks at this will immediately
understand what's going on and why :-)
>>> + pwms = <&pwm 0 10000>;
>>> + status = "okay";
>>> + };
>>> +
>>> + reg_1p8v: regulator-1p8v {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "1.8vd";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-boot-on;
>>> + regulator-always-on;
>>> + vin-supply = <&dcin>;
>>> + };
>>> +
>>> + reg_3p3v: regulator-3p3v {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "3.3vd";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + regulator-always-on;
>>> + vin-supply = <&dcin>;
>>> + };
>>> +
>>> + usb_vbus: regulator-usb-vbus {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "usb_vbus";
>>> + regulator-min-microvolt = <5000000>;
>>> + regulator-max-microvolt = <5000000>;
>>> + gpios = <&pio 20 GPIO_ACTIVE_LOW>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + en8811_a: regulator-phy1 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "phy1";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + gpio = <&pio 16 GPIO_ACTIVE_LOW>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + en8811_b: regulator-phy2 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "phy2";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + gpio = <&pio 17 GPIO_ACTIVE_LOW>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + leds {
>>> + compatible = "gpio-leds";
>>> +
>>> + green_led: led-0 {
>>> + color = <LED_COLOR_ID_GREEN>;
>>> + function = LED_FUNCTION_POWER;
>>> + gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
>>> + default-state = "on";
>>> + };
>>> + };
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> +
>>> + reset-key {
>>> + label = "reset";
>>> + linux,code = <KEY_RESTART>;
>>> + gpios = <&pio 7 GPIO_ACTIVE_LOW>;
>>> + };
>>> + };
>>> +
>>> +};
>>> +
>>> +&cpu_thermal {
>>> + cooling-maps {
>>> + map0 {
>>> + /* active: set fan to cooling level 2 */
>>> + cooling-device = <&fan 2 2>;
>>> + trip = <&cpu_trip_active_high>;
>>> + };
>>> +
>>> + map1 {
>>> + /* active: set fan to cooling level 1 */
>>> + cooling-device = <&fan 1 1>;
>>> + trip = <&cpu_trip_active_med>;
>>> + };
>>> +
>>> + map2 {
>>> + /* active: set fan to cooling level 0 */
>>> + cooling-device = <&fan 0 0>;
>>> + trip = <&cpu_trip_active_low>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&crypto {
>>> + status = "okay";
>>> +};
>>> +
>>> +ð {
>>> + status = "okay";
>>> +
>>> + gmac0: mac at 0 {
>>> + compatible = "mediatek,eth-mac";
>>> + reg = <0>;
>>> + phy-mode = "2500base-x";
>>> + phy-handle = <&phy14>;
>>> + };
>>> +
>>> + gmac1: mac at 1 {
>>> + compatible = "mediatek,eth-mac";
>>> + reg = <1>;
>>> + phy-mode = "2500base-x";
>>> + phy-handle = <&phy15>;
>>> + };
>>> +
>>> + mdio: mdio-bus {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +};
>>> +
>>> +&mmc0 {
>>> + pinctrl-names = "default", "state_uhs";
>>> + pinctrl-0 = <&mmc0_pins_default>;
>>> + pinctrl-1 = <&mmc0_pins_uhs>;
>>> + vmmc-supply = <®_3p3v>;
>>> + vqmmc-supply = <®_1p8v>;
>>> +};
>>> +
>>> +
>>> +&i2c0 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&i2c_pins>;
>>> + status = "okay";
>>> +
>>> + /* MAC Address EEPROM */
>>> + eeprom at 50 {
>>> + compatible = "atmel,24c02";
>>> + reg = <0x50>;
>>> +
>>> + address-width = <8>;
>>> + pagesize = <8>;
>>> + size = <256>;
>>> + };
>>> +};
>>> +
>>> +&mdio {
>>
>> You can just move all this stuff to where you declare the mdio-bus....
>
> Ok,see these 2 lines are already above,so can be dropped here.
>
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + phy14: ethernet-phy at 14 {
>>
>> I say that this is `phy0: ethernet-phy at 14` - because this is the first PHY on this
>> board.
>
> Ok,i change this and phy15
>
>>> + reg = <14>;
>>
>> Uhm.. doesn't this require the ethernet-phy-id03a2.a411 compatible?
>
> I can add it,but worked without it.
>
> There was a discussion about that and result was we don't need it in board dts,maybe add compatible in binding example.
>
> https://patchwork.kernel.org/project/netdevbpf/patch/20240206194751.1901802-2-ericwouds@gmail.com/#25703356
>
Ah, okay. Leave it then.
>>> + interrupts-extended = <&pio 48 IRQ_TYPE_EDGE_FALLING>;
>>> + reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
>>> + reset-assert-us = <10000>;
>>> + reset-deassert-us = <20000>;
>>> + phy-mode = "2500base-x";
>>> + full-duplex;
>>> + pause;
>>> + airoha,pnswap-rx;
>>> +
>>> + leds {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + led at 0 { /* en8811_a_gpio5 */
>>> + reg = <0>;
>>> + color = <LED_COLOR_ID_YELLOW>;
>>> + function = LED_FUNCTION_LAN;
>>> + function-enumerator = <1>;
>>
>> Why aren't you simply using a label?
>
> You mean the comment? I can add it of course like for regulators.
>
I mean in place of the function-enumerator... that's practically used to
distinguish between instances, it's not too common to see it, and usually
"label" replaces exactly that - just that, instead of a different number,
it gets a different name with no (usually) meaningless numbers :-)
Cheers!
>>> + default-state = "keep";
>>> + linux,default-trigger = "netdev";
>>> + };
>>> + led at 1 { /* en8811_a_gpio4 */
>>> + reg = <1>;
>>> + color = <LED_COLOR_ID_GREEN>;
>>> + function = LED_FUNCTION_LAN;
>>> + function-enumerator = <2>;
>>> + default-state = "keep";
>>> + linux,default-trigger = "netdev";
>>> + };
>>> + };
>>> + };
>>> +
>>> + phy15: ethernet-phy at 15 {
>>> + reg = <15>;
>>
>> Same here.
>>
>> Cheers,
>> Angelo
>>
>
>
> regards Frank
More information about the Linux-mediatek
mailing list