[PATCH v2 0/3] drm/mediatek: Add support for OF graphs

Alexandre Mergnat amergnat at baylibre.com
Thu May 2 09:53:28 PDT 2024



On 30/04/2024 13:33, AngeloGioacchino Del Regno wrote:
> Il 30/04/24 12:17, Alexandre Mergnat ha scritto:
>> Hi Angelo,
>>
>> On 09/04/2024 14:02, AngeloGioacchino Del Regno wrote:
>>> This series was tested on MT8195 Cherry Tomato and on MT8395 Radxa
>>> NIO-12L with both hardcoded paths, OF graph support and partially
>>> hardcoded paths (meaning main display through OF graph and external
>>> display hardcoded, because of OVL_ADAPTOR).
>>
>> Is that make sense for you to add the DTS changes of these boards into this serie ?
>> I asked because, IMHO, that could help to understand the serie.
>>
> 
> Yes and no... but I imagine that you're asking this because you're trying to
> prepare something with a different SoC+board(s) combination :-)
> 
> In that case, I'm preventively sorry because what follows here is not 100%
> perfectly tidy yet as I didn't mean to send the devicetree commits upstream
> before this series got picked....
> 
> ... but there you go - I'm sure that you won't mind and that the example will
> be more than good enough for you.
> 
> Please note that one of the reasons why I didn't want to add this to the series
> is that the following changes show only a mere 50% of the reasons why we want OF
> graph support on mediatek-drm (but mainly, it's because I didn't have time to
> actually rebase etc :-P )

Thanks for the explanations and examples.
Unfortunately, I have 2 display but only one is working (the main: DSI0) when I use the dts method.
I've probably missed something but I don't know what.

In my "mmsys" node, if I swap display (the ext endpoint with the main endpoint), the DPI0 is 
working, but not the DSI0. I conclude my both paths are good.

Then, I've put some trace into "mtk_drm_of_ddp_path_build" to check if it parse the two endpoint of 
the node. Both are parsed, but "of_ep.port" is always = 0. According to "of_graph_parse_endpoint" 
function, "port" is the value of the parent "reg", whereas "id" is the value of the endpoint "reg".
So I replaced "of_ep.port" by "of_ep.id". Now I've of_ep.id = 0 for main and of_ep.id = 1 for EXT.

Now I've the good CRTC path, I get this error:
   mediatek-drm mediatek-drm.1.auto: Invalid display hw pipeline. Last component: 54 (ret=-2)
   mediatek-drm mediatek-drm.1.auto: probe with driver mediatek-drm failed with error -22

After quick look, the "cpath" into "mtk_drm_of_ddp_path_build_one" (or deeper functions) seems not 
be used as it should, due to the previous "of_ep.port" => "of_ep.id" change of course.

But I probably have to fix "of_ep.port" because I've mis-coded something. Just in case, I share you 
my diff:

diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
index 1aa3426f561b..f660481d3fe8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -109,15 +109,51 @@ vsys_lcm_reg: regulator-vsys-lcm {
  	};
  };

+&cpu0 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
  &dpi0 {
  	pinctrl-0 = <&dpi_default_pins>;
  	pinctrl-1 = <&dpi_idle_pins>;
  	pinctrl-names = "default", "sleep";
  	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;

-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&it66121_in>;
+		port at 0 {
+			reg = <0>;
+			dpi0_in: endpoint {
+				remote-endpoint = <&rdma1_out>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&it66121_in>;
+			};
  		};
  	};
  };
@@ -137,36 +173,28 @@ panel at 0 {

  		port {
  			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+				remote-endpoint = <&dsi0_out>;
  			};
  		};
  	};
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;

-	port {
-		dsi_out: endpoint {
-			remote-endpoint = <&panel_in>;
+		port at 0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
  		};
-	};
-};

-&cpu0 {
-	proc-supply = <&mt6357_vproc_reg>;
-	sram-supply = <&mt6357_vsram_proc_reg>;
-};
-
-&cpu1 {
-	proc-supply = <&mt6357_vproc_reg>;
-	sram-supply = <&mt6357_vsram_proc_reg>;
-};
-
-&cpu2 {
-	proc-supply = <&mt6357_vproc_reg>;
-	sram-supply = <&mt6357_vsram_proc_reg>;
-};
-
-&cpu3 {
-	proc-supply = <&mt6357_vproc_reg>;
-	sram-supply = <&mt6357_vsram_proc_reg>;
+		port at 1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
  };

  &ethernet {
@@ -229,7 +257,7 @@ port at 0 {
  				reg = <0>;
  				it66121_in: endpoint {
  					bus-width = <12>;
-					remote-endpoint = <&dpi_out>;
+					remote-endpoint = <&dpi0_out>;
  				};
  			};

@@ -557,6 +585,10 @@ &pwm {
  	status = "okay";
  };

+&rdma1_out {
+	remote-endpoint = <&dpi0_in>;
+};
+
  &ssusb {
  	dr_mode = "otg";
  	maximum-speed = "high-speed";
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index d34519a33c90..dbb559959a9d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -762,6 +762,19 @@ mmsys: syscon at 14000000 {
  			compatible = "mediatek,mt8365-mmsys", "syscon";
  			reg = <0 0x14000000 0 0x1000>;
  			#clock-cells = <1>;
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_main: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+				mmsys_ext: endpoint at 1 {
+					reg = <1>;
+					remote-endpoint = <&rdma1_in>;
+				};
+			};
  		};

  		mutex: mutex at 14001000 {
@@ -801,6 +814,24 @@ ovl0: ovl at 1400b000 {
  			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
  			iommus = <&iommu M4U_PORT_DISP_OVL0>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					ovl0_in: endpoint {
+						remote-endpoint = <&mmsys_main>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
  		};

  		rdma0: rdma at 1400d000 {
@@ -811,6 +842,24 @@ rdma0: rdma at 1400d000 {
  			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
  			mediatek,rdma-fifo-size = <5120>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
  		};

  		color0: color at 1400f000 {
@@ -819,6 +868,24 @@ color0: color at 1400f000 {
  			clocks = <&mmsys CLK_MM_MM_DISP_COLOR0>;
  			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
  		};

  		ccorr0: ccorr at 14010000 {
@@ -827,6 +894,24 @@ ccorr0: ccorr at 14010000 {
  			clocks = <&mmsys CLK_MM_MM_DISP_CCORR0>;
  			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
  		};

  		aal0: aal at 14011000 {
@@ -835,6 +920,24 @@ aal0: aal at 14011000 {
  			clocks = <&mmsys CLK_MM_MM_DISP_AAL0>;
  			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
  		};

  		gamma0: gamma at 14012000 {
@@ -843,6 +946,24 @@ gamma0: gamma at 14012000 {
  			clocks = <&mmsys CLK_MM_MM_DISP_GAMMA0>;
  			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
  		};

  		dither0: dither at 14013000 {
@@ -851,6 +972,23 @@ dither0: dither at 14013000 {
  			clocks = <&mmsys CLK_MM_MM_DISP_DITHER0>;
  			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					dither0_out: endpoint {
+					};
+				};
+			};
  		};

  		dsi0: dsi at 14014000 {
@@ -874,6 +1012,23 @@ rdma1: rdma at 14016000 {
  			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
  			mediatek,rdma-fifo-size = <2048>;
  			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					rdma1_in: endpoint {
+						remote-endpoint = <&mmsys_ext>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					rdma1_out: endpoint {
+					};
+				};
+			};
  		};

  		dpi0: dpi at 14018000 {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index dacf4eaa3457..5992b7865310 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -230,22 +230,6 @@ static const unsigned int mt8195_mtk_ddp_ext[] = {
  	DDP_COMPONENT_DP_INTF1,
  };

-static const unsigned int mt8365_mtk_ddp_main[] = {
-	DDP_COMPONENT_OVL0,
-	DDP_COMPONENT_RDMA0,
-	DDP_COMPONENT_COLOR0,
-	DDP_COMPONENT_CCORR,
-	DDP_COMPONENT_AAL0,
-	DDP_COMPONENT_GAMMA,
-	DDP_COMPONENT_DITHER0,
-	DDP_COMPONENT_DSI0,
-};
-
-static const unsigned int mt8365_mtk_ddp_ext[] = {
-	DDP_COMPONENT_RDMA1,
-	DDP_COMPONENT_DPI0,
-};
-
  static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
  	.main_path = mt2701_mtk_ddp_main,
  	.main_len = ARRAY_SIZE(mt2701_mtk_ddp_main),
@@ -334,10 +318,6 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = {
  };

  static const struct mtk_mmsys_driver_data mt8365_mmsys_driver_data = {
-	.main_path = mt8365_mtk_ddp_main,
-	.main_len = ARRAY_SIZE(mt8365_mtk_ddp_main),
-	.ext_path = mt8365_mtk_ddp_ext,
-	.ext_len = ARRAY_SIZE(mt8365_mtk_ddp_ext),
  	.mmsys_dev_num = 1,
  };



-- 
Regards,
Alexandre



More information about the Linux-mediatek mailing list