[PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards

[arinc.unal at arinc9.com]

On 14.03.2024 15:20, Arınç ÜNAL via B4 Relay wrote:
> Hello.
> 
> This is a small patch series setting the PHY address of MT7531 to 0x1f 
> on
> all boards that have the switch.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> ---
> Arınç ÜNAL (2):
>        arm64: dts: mediatek: mt7622: set PHY address of MT7531 switch 
> to 0x1f
>        arm64: dts: mediatek: mt7986: set PHY address of MT7531 switch 
> to 0x1f
> 
>   arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts             | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts             | 4 ++--
>   5 files changed, 10 insertions(+), 10 deletions(-)
> ---
> base-commit: ba90af39ba57b3fe3ecfdba0c87a80d20c7b788d
> change-id: 20240314-for-mediatek-mt7531-phy-address-9d0b4cfeca21
> 
> Best regards,

Reminder that this patch series is waiting.

Arınç