[PATCH RESEND v6 1/5] dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
Abel Vesa
abel.vesa at linaro.org
Tue Mar 26 09:28:16 PDT 2024
Add dedicated schema for X1E80100 PMIC ARB (v7) as it allows multiple
buses by declaring them as child nodes.
Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
.../bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml | 136 +++++++++++++++++++++
1 file changed, 136 insertions(+)
diff --git a/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..bdf362c4a147
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,x1e80100-spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 SPMI Controller (PMIC Arbiter v7)
+
+maintainers:
+ - Stephen Boyd <sboyd at kernel.org>
+
+description: |
+ The X1E80100 SPMI PMIC Arbiter implements HW version 7 and it's an SPMI
+ controller with wrapping arbitration logic to allow for multiple on-chip
+ devices to control up to 2 SPMI separate buses.
+
+ The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+ to slave devices.
+
+properties:
+ compatible:
+ const: qcom,x1e80100-spmi-pmic-arb
+
+ reg:
+ items:
+ - description: core registers
+ - description: tx-channel per virtual slave regosters
+ - description: rx-channel (called observer) per virtual slave registers
+
+ reg-names:
+ items:
+ - const: core
+ - const: chnls
+ - const: obsrvr
+
+ ranges: true
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ indicates the active Execution Environment identifier
+
+ qcom,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ which of the PMIC Arb provided channels to use for accesses
+
+patternProperties:
+ "spmi@[a-f0-9]+$":
+ type: object
+ $ref: /schemas/spmi/spmi.yaml
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ items:
+ - description: configuration registers
+ - description: interrupt controller registers
+
+ reg-names:
+ items:
+ - const: cnfg
+ - const: intr
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: periph_irq
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 4
+ description: |
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information,
+ as defined in dt-bindings/interrupt-controller/irq.h
+
+required:
+ - compatible
+ - reg-names
+ - qcom,ee
+ - qcom,channel
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: arbiter at c400000 {
+ compatible = "qcom,x1e80100-spmi-pmic-arb";
+ reg = <0 0x0c400000 0 0x3000>,
+ <0 0x0c500000 0 0x4000000>,
+ <0 0x0c440000 0 0x80000>;
+ reg-names = "core", "chnls", "obsrvr";
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ spmi_bus0: spmi at c42d000 {
+ reg = <0 0x0c42d000 0 0x4000>,
+ <0 0x0c4c0000 0 0x10000>;
+ reg-names = "cnfg", "intr";
+
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+ };
--
2.34.1
More information about the Linux-mediatek
mailing list