[PATCH v2 2/2] spi: spi-mt65xx: Rename a variable in interrupt handler

Fei Shao fshao at chromium.org
Thu Mar 21 00:08:58 PDT 2024


All the spi_transfer variables in this file use the name "xfer" except
the one in mtk_spi_interrupt(). Align the naming for consistency and
easier searching.

While at it, reformat one memcpy() usage since the coding style allows
100 column lines today.

This commit has no functional change.

Signed-off-by: Fei Shao <fshao at chromium.org>
---

(no changes since v1)

 drivers/spi/spi-mt65xx.c | 32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index e4cb22fe0075..36c2f52cd6b8 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -748,7 +748,7 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 	u32 cmd, reg_val, cnt, remainder, len;
 	struct spi_controller *host = dev_id;
 	struct mtk_spi *mdata = spi_controller_get_devdata(host);
-	struct spi_transfer *trans = mdata->cur_transfer;
+	struct spi_transfer *xfer = mdata->cur_transfer;
 
 	reg_val = readl(mdata->base + SPI_STATUS0_REG);
 	if (reg_val & MTK_SPI_PAUSE_INT_STATUS)
@@ -762,42 +762,40 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 		return IRQ_HANDLED;
 	}
 
-	if (!host->can_dma(host, NULL, trans)) {
-		if (trans->rx_buf) {
+	if (!host->can_dma(host, NULL, xfer)) {
+		if (xfer->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,
-				     trans->rx_buf + mdata->num_xfered, cnt);
+				     xfer->rx_buf + mdata->num_xfered, cnt);
 			remainder = mdata->xfer_len % 4;
 			if (remainder > 0) {
 				reg_val = readl(mdata->base + SPI_RX_DATA_REG);
-				memcpy(trans->rx_buf +
-					mdata->num_xfered +
-					(cnt * 4),
+				memcpy(xfer->rx_buf + (cnt * 4) + mdata->num_xfered,
 					&reg_val,
 					remainder);
 			}
 		}
 
 		mdata->num_xfered += mdata->xfer_len;
-		if (mdata->num_xfered == trans->len) {
+		if (mdata->num_xfered == xfer->len) {
 			spi_finalize_current_transfer(host);
 			return IRQ_HANDLED;
 		}
 
-		len = trans->len - mdata->num_xfered;
+		len = xfer->len - mdata->num_xfered;
 		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
 		mtk_spi_setup_packet(host);
 
-		if (trans->tx_buf) {
+		if (xfer->tx_buf) {
 			cnt = mdata->xfer_len / 4;
 			iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
-					trans->tx_buf + mdata->num_xfered, cnt);
+					xfer->tx_buf + mdata->num_xfered, cnt);
 
 			remainder = mdata->xfer_len % 4;
 			if (remainder > 0) {
 				reg_val = 0;
 				memcpy(&reg_val,
-					trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+					xfer->tx_buf + (cnt * 4) + mdata->num_xfered,
 					remainder);
 				writel(reg_val, mdata->base + SPI_TX_DATA_REG);
 			}
@@ -809,21 +807,21 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 	}
 
 	if (mdata->tx_sgl)
-		trans->tx_dma += mdata->xfer_len;
+		xfer->tx_dma += mdata->xfer_len;
 	if (mdata->rx_sgl)
-		trans->rx_dma += mdata->xfer_len;
+		xfer->rx_dma += mdata->xfer_len;
 
 	if (mdata->tx_sgl && (mdata->tx_sgl_len == 0)) {
 		mdata->tx_sgl = sg_next(mdata->tx_sgl);
 		if (mdata->tx_sgl) {
-			trans->tx_dma = sg_dma_address(mdata->tx_sgl);
+			xfer->tx_dma = sg_dma_address(mdata->tx_sgl);
 			mdata->tx_sgl_len = sg_dma_len(mdata->tx_sgl);
 		}
 	}
 	if (mdata->rx_sgl && (mdata->rx_sgl_len == 0)) {
 		mdata->rx_sgl = sg_next(mdata->rx_sgl);
 		if (mdata->rx_sgl) {
-			trans->rx_dma = sg_dma_address(mdata->rx_sgl);
+			xfer->rx_dma = sg_dma_address(mdata->rx_sgl);
 			mdata->rx_sgl_len = sg_dma_len(mdata->rx_sgl);
 		}
 	}
@@ -841,7 +839,7 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 
 	mtk_spi_update_mdata_len(host);
 	mtk_spi_setup_packet(host);
-	mtk_spi_setup_dma_addr(host, trans);
+	mtk_spi_setup_dma_addr(host, xfer);
 	mtk_spi_enable_transfer(host);
 
 	return IRQ_HANDLED;
-- 
2.44.0.396.g6e790dbe36-goog




More information about the Linux-mediatek mailing list