[PATCH 0/3] Fix EEE support for MT7531 and MT7988 SoC switch

[Arınç ÜNAL]

On 19.03.2024 21:25, Daniel Golle wrote:
> On Mon, Mar 18, 2024 at 10:46:22AM +0300, Arınç ÜNAL via B4 Relay wrote:
>> Hi.
>>
>> This patch series fixes EEE support for MT7531 and the switch on the MT7988
>> SoC. EEE did not work on MT7531 on most boards before this, it is unclear
>> what's the status on MT7988 SoC switch as I don't have the hardware.
> 
> EEE seems to already work just fine on the MT7988 built-in switch, at least
> on the BPI-R4. I don't think the SoC has bootstrap pins related to EEE like
> stand-alone MT753x may have.
> 
> root at bpi-r4:~# ethtool --show-eee lan1
> EEE settings for lan1:
>      EEE status: disabled
>      Tx LPI: 30 (us)
>      Supported EEE link modes:  100baseT/Full
>                                 1000baseT/Full
>      Advertised EEE link modes:  Not reported
>      Link partner advertised EEE link modes:  100baseT/Full
>                                               1000baseT/Full
> 
> root at bpi-r4:~# ethtool --set-eee lan1 eee on
> root at bpi-r4:~# ethtool --show-eee lan1
> EEE settings for lan1:
>      EEE status: enabled - inactive
>      Tx LPI: 30 (us)
>      Supported EEE link modes:  100baseT/Full
>                                 1000baseT/Full
>      Advertised EEE link modes:  100baseT/Full
>                                  1000baseT/Full
>      Link partner advertised EEE link modes:  Not reported
> root at bpi-r4:~# ethtool --show-eee lan1
> EEE settings for lan1:
>      EEE status: enabled - active
>      Tx LPI: 30 (us)
>      Supported EEE link modes:  100baseT/Full
>                                 1000baseT/Full
>      Advertised EEE link modes:  100baseT/Full
>                                  1000baseT/Full
>      Link partner advertised EEE link modes:  100baseT/Full
>                                               1000baseT/Full
> 
> So don't fix if it ain't broken maybe...?

I would argue that EEE advertisement on the PHY should be enabled by
default. I guess we're supposed to supply that on the PHY driver. Can you
test with this diff applied and see if it works without manually enabling
EEE using ethtool?

diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek-ge-soc.c
index 0f3a1538a8b8..5f482c12018a 100644
--- a/drivers/net/phy/mediatek-ge-soc.c
+++ b/drivers/net/phy/mediatek-ge-soc.c
@@ -978,6 +978,9 @@ static void mt798x_phy_eee(struct phy_device *phydev)
  		       MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
  		       MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
  		       FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
+
+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX |
+		      MDIO_EEE_1000T);
  }
  
  static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,

Arınç