[PATCH v5 05/13] drm/mediatek: Set DRM mode configs accordingly

[Shawn Sung (宋孝謙)]

Hi CK,

On Fri, 2024-03-01 at 07:21 +0000, CK Hu (胡俊光) wrote:
> Hi, Hsiao-chien:
> 
> On Thu, 2024-02-15 at 18:11 +0800, Hsiao Chien Sung wrote:
> > Set DRM mode configs limitation according to the hardware
> > capabilities
> > and pass the IGT checks as below:
> > 
> > - The test "graphics.IgtKms.kms_plane" requires a frame buffer with
> >   width of 4512 pixels (> 4096).
> > - The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor
> > size
> > is
> >   defined, and run the test with cursor size from 1x1 to 512x512.
> > 
> > Please notice that the test conditions may change as IGT is
> > updated.
> > 
> > Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_drv.c | 25
> > +++++++++++++++++++++++++
> >  drivers/gpu/drm/mediatek/mtk_drm_drv.h |  3 +++
> >  2 files changed, 28 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > index 890e1e93a2227..8cf157ec66ba6 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > @@ -296,6 +296,9 @@ static const struct mtk_mmsys_driver_data
> > mt8188_vdosys0_driver_data = {
> >  	.conn_routes = mt8188_mtk_ddp_main_routes,
> >  	.num_conn_routes = ARRAY_SIZE(mt8188_mtk_ddp_main_routes),
> >  	.mmsys_dev_num = 2,
> > +	.max_pitch = GENMASK(15, 0),
> > +	.min_width = 1,
> > +	.min_height = 1,
> >  };
> >  
> >  static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data
> > =
> > {
> > @@ -310,6 +313,9 @@ static const struct mtk_mmsys_driver_data
> > mt8195_vdosys0_driver_data = {
> >  	.main_path = mt8195_mtk_ddp_main,
> >  	.main_len = ARRAY_SIZE(mt8195_mtk_ddp_main),
> >  	.mmsys_dev_num = 2,
> > +	.max_pitch = GENMASK(15, 0),
> > +	.min_width = 1,
> > +	.min_height = 1,
> >  };
> >  
> >  static const struct mtk_mmsys_driver_data
> > mt8195_vdosys1_driver_data
> > = {
> > @@ -317,6 +323,9 @@ static const struct mtk_mmsys_driver_data
> > mt8195_vdosys1_driver_data = {
> >  	.ext_len = ARRAY_SIZE(mt8195_mtk_ddp_ext),
> >  	.mmsys_id = 1,
> >  	.mmsys_dev_num = 2,
> > +	.max_pitch = GENMASK(15, 0),
> > +	.min_width = 2, /* 2-pixel align when ethdr is bypassed */
> > +	.min_height = 1,
> >  };
> >  
> >  static const struct of_device_id mtk_drm_of_ids[] = {
> > @@ -495,6 +504,18 @@ static int mtk_drm_kms_init(struct drm_device
> > *drm)
> >  		for (j = 0; j < private->data->mmsys_dev_num; j++) {
> >  			priv_n = private->all_drm_private[j];
> >  
> > +			if (priv_n->data->max_pitch) {
> > +				/* Save 4 bytes for the color depth
> > (pitch = width * bpp) */
> > +				drm->mode_config.max_width  = priv_n-
> > > data->max_pitch >> 2;
> > 
> > +				drm->mode_config.max_height = priv_n-
> > > data->max_pitch >> 2;
> 
> I think the term 'pitch' is for width not for height. And I think you
> should not divide height by 4. So I would like to have priv_n->data-
> > max_height.
> 
Got it. Will change another way to implement this part.
I'll remain the orginal logic that set the maximum width/height to 4096
and overwrite it only if the new value is defined in the driver data.

Regards,
Shawn