[PATCH 11/14] mips: dts: ralink: mt7621: reorder ethernet node attributes and kids
Justin Swartz
justin.swartz at risingedge.co.za
Fri Mar 15 21:54:39 PDT 2024
Rearrange attributes and descendents declared under the
ethernet node, recursively, to follow the DTS style guide.
Signed-off-by: Justin Swartz <justin.swartz at risingedge.co.za>
---
arch/mips/boot/dts/ralink/mt7621.dtsi | 88 +++++++++++++++------------
1 file changed, 48 insertions(+), 40 deletions(-)
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 8aa9eba68..f6418201b 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -364,46 +364,22 @@ ethernet: ethernet at 1e100000 {
compatible = "mediatek,mt7621-eth";
reg = <0x1e100000 0x10000>;
- clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
- clock-names = "fe", "ethif";
-
#address-cells = <1>;
#size-cells = <0>;
- resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
- reset-names = "fe", "eth";
+ clock-names = "fe", "ethif";
+ clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
- mediatek,ethsys = <&sysc>;
-
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>;
- gmac0: mac at 0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "trgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
-
- gmac1: mac at 1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
+ reset-names = "fe", "eth";
+ resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
+ mediatek,ethsys = <&sysc>;
mdio: mdio-bus {
#address-cells = <1>;
@@ -412,73 +388,105 @@ mdio: mdio-bus {
switch0: switch at 1f {
compatible = "mediatek,mt7621";
reg = <0x1f>;
- mediatek,mcm;
- resets = <&sysc MT7621_RST_MCM>;
- reset-names = "mcm";
- interrupt-controller;
+
#interrupt-cells = <1>;
+ interrupt-controller;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+ reset-names = "mcm";
+ resets = <&sysc MT7621_RST_MCM>;
+
+ mediatek,mcm;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
port at 0 {
- status = "disabled";
reg = <0>;
label = "swp0";
+ status = "disabled";
};
port at 1 {
- status = "disabled";
reg = <1>;
label = "swp1";
+ status = "disabled";
};
port at 2 {
- status = "disabled";
reg = <2>;
label = "swp2";
+ status = "disabled";
};
port at 3 {
- status = "disabled";
reg = <3>;
label = "swp3";
+ status = "disabled";
};
port at 4 {
- status = "disabled";
reg = <4>;
label = "swp4";
+ status = "disabled";
};
port at 5 {
reg = <5>;
+
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
- speed = <1000>;
full-duplex;
pause;
+ speed = <1000>;
};
};
port at 6 {
reg = <6>;
+
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
- speed = <1000>;
full-duplex;
pause;
+ speed = <1000>;
};
};
};
};
};
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+
+ phy-mode = "trgmii";
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+
+ phy-mode = "rgmii";
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+ };
+
};
pcie: pcie at 1e140000 {
--
More information about the Linux-mediatek
mailing list