[PATCH 12/14] mips: dts: ralink: mt7621: reorder pcie node attributes and children

[Justin Swartz]

Reorder the attributes and child nodes of the PCIe Controller
node to meet the DTS style guidelines.

Signed-off-by: Justin Swartz <justin.swartz at risingedge.co.za>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 68 +++++++++++++++++----------
 1 file changed, 43 insertions(+), 25 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index f6418201b..aa06d12ac 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -495,70 +495,88 @@ pcie: pcie at 1e140000 {
 		      <0x1e142000 0x100>, /* pcie port 0 RC control registers */
 		      <0x1e143000 0x100>, /* pcie port 1 RC control registers */
 		      <0x1e144000 0x100>; /* pcie port 2 RC control registers */
+		ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
+			 <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
+
 		#address-cells = <3>;
+		#interrupt-cells = <1>;
 		#size-cells = <2>;
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pins>;
-
 		device_type = "pci";
 
-		ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
-			 <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xF800 0 0 0>;
-		interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED  4 IRQ_TYPE_LEVEL_HIGH>,
 				<0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
 				<0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
 
-		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pins>;
 
 		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 
+		status = "disabled";
+
 		pcie at 0,0 {
 			reg = <0x0000 0 0 0 0>;
+			ranges;
+
 			#address-cells = <3>;
+			#interrupt-cells = <1>;
 			#size-cells = <2>;
+
+			clocks = <&sysc MT7621_CLK_PCIE0>;
+
 			device_type = "pci";
-			#interrupt-cells = <1>;
+
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&sysc MT7621_RST_PCIE0>;
-			clocks = <&sysc MT7621_CLK_PCIE0>;
-			phys = <&pcie0_phy 1>;
+
 			phy-names = "pcie-phy0";
-			ranges;
+			phys = <&pcie0_phy 1>;
+
+			resets = <&sysc MT7621_RST_PCIE0>;
 		};
 
 		pcie at 1,0 {
 			reg = <0x0800 0 0 0 0>;
+			ranges;
+
 			#address-cells = <3>;
+			#interrupt-cells = <1>;
 			#size-cells = <2>;
+
+			clocks = <&sysc MT7621_CLK_PCIE1>;
+
 			device_type = "pci";
-			#interrupt-cells = <1>;
+
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&sysc MT7621_RST_PCIE1>;
-			clocks = <&sysc MT7621_CLK_PCIE1>;
-			phys = <&pcie0_phy 1>;
+
 			phy-names = "pcie-phy1";
-			ranges;
+			phys = <&pcie0_phy 1>;
+
+			resets = <&sysc MT7621_RST_PCIE1>;
 		};
 
 		pcie at 2,0 {
 			reg = <0x1000 0 0 0 0>;
+			ranges;
+
 			#address-cells = <3>;
+			#interrupt-cells = <1>;
 			#size-cells = <2>;
+
+			clocks = <&sysc MT7621_CLK_PCIE2>;
+
 			device_type = "pci";
-			#interrupt-cells = <1>;
+
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&sysc MT7621_RST_PCIE2>;
-			clocks = <&sysc MT7621_CLK_PCIE2>;
-			phys = <&pcie2_phy 0>;
+
 			phy-names = "pcie-phy2";
-			ranges;
+			phys = <&pcie2_phy 0>;
+
+			resets = <&sysc MT7621_RST_PCIE2>;
 		};
 	};
 
--