[PATCH] mips: dts: ralink: mt7621: add cell count properties to usb0

[Justin Swartz]

Hi Krzysztof

On 2024-03-07 10:01, Krzysztof Kozlowski wrote:
> On 06/03/2024 21:21, Justin Swartz wrote:
>> Add default #address-cells and #size-cells properties to usb0,
>> suitable for hubs and devices without explicitly declared
>> interface nodes, as:
>> 
>>   "#address-cells":
>>     description: should be 1 for hub nodes with device nodes,
>>       should be 2 for device nodes with interface nodes.
>>     enum: [1, 2]
>> 
>>   "#size-cells":
>>     const: 0
>> 
>> -- from Documentation/devicetree/bindings/usb/usb-device.yaml
>> 
>> Signed-off-by: Justin Swartz <justin.swartz at risingedge.co.za>
>> ---
>>  arch/mips/boot/dts/ralink/mt7621.dtsi | 3 +++
>>  1 file changed, 3 insertions(+)
>> 
>> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi 
>> b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> index 2069249c8..f02965db1 100644
>> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
>> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> @@ -309,6 +309,9 @@ usb: usb at 1e1c0000 {
>> 
>>  		interrupt-parent = <&gic>;
>>  		interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
> 
> Doesn't this bring new W=1 warnings?

For a fresh build (make O=build clean; make O=build W=1): I do not 
receive any warnings regarding mt7621.dtsi or my board's .dts file. I 
added these properties to the usb node because I had received warnings 
about a child node for a permenantly-connected/onboard hub:

--%--

/ {
	...

	usb_fixed_5v0: regulator {
		compatible = "regulator-fixed";
		regulator-name = "usb_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-boot-on;
		regulator-always-on;
	};

	usb_fixed_3v3: regulator {
		compatible = "regulator-fixed";
		regulator-name = "usb_vusb33";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&usb {
	usb3-lpm-capable;

	vbus-supply = <&usb_fixed_5v0>;
	vusb33-supply = <&usb_fixed_3v3>;

	hub: hub at 0 {
		compatible = "usb5e3,608";
		reg = <1>;
	};
};

--%--

If the #address-cells and #size-cells properties are removed from the 
usb node, the following warnings are generated:

$ make O=build W=1 dtbs
make[1]: Entering directory 
'/home/user/projects/xfl-mt7621/src/linux/build'
   GEN     Makefile
   CALL    ../scripts/checksyscalls.sh
   DTC     arch/mips/boot/dts/ralink/mt7621-client-product.dtb
../arch/mips/boot/dts/ralink/mt7621-client-product.dts:276.3-13: Warning 
(reg_format): /usb at 1e1c0000/hub at 0:reg: property has invalid length (4 
bytes) (#address-cells == 2, #size-cells == 1)
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(pci_device_reg): Failed prerequisite 'reg_format'
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(pci_device_bus_num): Failed prerequisite 'reg_format'
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(simple_bus_reg): Failed prerequisite 'reg_format'
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(i2c_bus_reg): Failed prerequisite 'reg_format'
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(spi_bus_reg): Failed prerequisite 'reg_format'
../arch/mips/boot/dts/ralink/mt7621-client-product.dts:274.13-277.4: 
Warning (avoid_default_addr_size): /usb at 1e1c0000/hub at 0: Relying on 
default #address-cells value
../arch/mips/boot/dts/ralink/mt7621-client-product.dts:274.13-277.4: 
Warning (avoid_default_addr_size): /usb at 1e1c0000/hub at 0: Relying on 
default #size-cells value
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(avoid_unnecessary_addr_size): Failed prerequisite 
'avoid_default_addr_size'
arch/mips/boot/dts/ralink/mt7621-client-product.dtb: Warning 
(unique_unit_address_if_enabled): Failed prerequisite 
'avoid_default_addr_size'
   DTC     arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dtb
   DTC     arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dtb
   DTC     arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb
make[1]: Leaving directory 
'/home/user/projects/xfl-mt7621/src/linux/build'


If I add add them back to the usb node, this is the result:

$ make O=build W=1 dtbs
make[1]: Entering directory 
'/home/user/projects/xfl-mt7621/src/linux/build'
   GEN     Makefile
   CALL    ../scripts/checksyscalls.sh
   DTC     arch/mips/boot/dts/ralink/mt7621-client-product.dtb
   DTC     arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dtb
   DTC     arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dtb
   DTC     arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb
make[1]: Leaving directory 
'/home/user/projects/xfl-mt7621/src/linux/build'


> Best regards,
> Krzysztof

Regards
Justin