[PATCH 3/5] soc: mediatek: mtk-cmdq: Add cmdq_pkt_poll_addr() function

[AngeloGioacchino Del Regno]

Il 01/03/24 12:11, Jason-JH.Lin ha scritto:
> Add cmdq_pkt_poll_addr function to support CMDQ user making
> an instruction for polling a specific address of hardware rigster
> to check the value with or without mask.
> 
> POLL is an old operation in GCE, so it does not support SPR and

POLL is a legacy operation in GCE, so it does not support .....

> CMDQ_CODE_LOGIC. CMDQ users need to use GPR and CMDQ_CODE_MASK
> to move polling register address to GPR to make an instruction.
> This will be done in cmdq_pkt_poll_addr().
> 
> Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> Change-Id: I91ff98e06570dc4501187eb29de64aaa65b1cf13
> ---
>   drivers/soc/mediatek/mtk-cmdq-helper.c | 38 ++++++++++++++++++++++++++
>   include/linux/soc/mediatek/mtk-cmdq.h  | 16 +++++++++++
>   2 files changed, 54 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 3a1e47ad8a41..2e9fc9bb1183 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -12,6 +12,7 @@
>   
>   #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
>   #define CMDQ_POLL_ENABLE_MASK	BIT(0)
> +#define CMDQ_POLL_HIGH_ADDR_GPR	(14)
>   #define CMDQ_EOC_IRQ_EN		BIT(0)
>   #define CMDQ_REG_TYPE		1
>   #define CMDQ_JUMP_RELATIVE	1
> @@ -406,6 +407,43 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>   }
>   EXPORT_SYMBOL(cmdq_pkt_poll_mask);
>   
> +int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask)
> +{
> +	struct cmdq_instruction inst = { {0} };
> +	int err;
> +	u8 use_mask = 0;
> +
> +	if (mask != U32_MAX) {

inst.op = CMDQ_CODE_MASK;

/* Describe what you're doing here as a comment please */
if (mask < GENMASK(31, 0)) {
	inst.mask = ~mask;
	err = cmdq_pkt_append_command ...
	use_mask ...
}

/* POLL is a legacy operation in GCE and ... etc etc */
inst.mask = addr;
inst.dst_t = ...
inst.sop = ...
err = cmdq_pkt_append... etc etc etc


> +		inst.op = CMDQ_CODE_MASK;
> +		inst.mask = ~mask;
> +		err = cmdq_pkt_append_command(pkt, inst);
> +		if (err != 0)
> +			return err;
> +		use_mask = CMDQ_POLL_ENABLE_MASK;
> +	}
> +
> +	/*
> +	 * POLL is an old operation in GCE and it does not support SPR and CMDQ_CODE_LOGIC,
> +	 * so it can not use cmdq_pkt_assign to keep polling register address to SPR.
> +	 * It needs to use GPR and CMDQ_CODE_MASK to move polling register address to GPR.
> +	 */
> +	inst.op = CMDQ_CODE_MASK;
> +	inst.dst_t = CMDQ_REG_TYPE;
> +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
> +	inst.mask = addr;
> +	err = cmdq_pkt_append_command(pkt, inst);
> +	if (err < 0)
> +		return err;
> +
> +	inst.op = CMDQ_CODE_POLL;
> +	inst.dst_t = CMDQ_REG_TYPE;
> +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;

This is a reassignment of the same value. You can do it like

/* dst_t and sop must be CMDQ_REG_TYPE, CMDQ_POLL_HIGH_ADDR_GPR */
inst.op = CMDQ_CODE_POLL;
inst.offset ...
inst.value ....

(but you're also inheriting the same `inst.mask`, was that intended?)

err = cmdq_pkt_append ....
if (err < 0)
	return err;

return 0
}

> +	inst.offset = use_mask;
> +	inst.value = value;
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_poll_addr);
> +
>   int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
>   {
>   	struct cmdq_instruction inst = {};
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index b6dbe2d8f16a..2fe9be240fbc 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -253,6 +253,22 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
>   int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>   		       u16 offset, u32 value, u32 mask);
>   
> +/**
> + * cmdq_pkt_poll_addr() - Append polling command to the CMDQ packet, ask GCE to
> + *			 execute an instruction that wait for a specified
> + *			 address of hardware register to check for the value
> + *			 w/ or w/o mask.
> + *			 All GCE hardware threads will be blocked by this
> + *			 instruction.

/**
  * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ packet
  * @pkt:	the CMDQ packet
  * @addr:	the hardware register address
  * @value:	the specified target register value
  * @mask:	the specified target register mask
  *
  * Appends a polling (POLL) command to the CMDQ packet and asks the GCE
  * to execute an instruction that checks for the specified `value` (with
  * or without `mask`) to appear in the specified hardware register `addr`.
  * All GCE threads will be blocked by this instruction.
  *
  * Return: 0 for success or negative error code
  */

That's better, isn't it? :-)

Cheers,
Angelo