[RESEND, PATCH 5/5] mailbox: mtk-cmdq: Add support runtime get and set GCE event

[CK Hu (胡俊光)]

Hi, Jason:

On Fri, 2024-03-01 at 22:44 +0800, Jason-JH.Lin wrote:
> ISP drivers need to get and set GCE event in their runtime contorl
> flow.
> So add these functions to support get and set GCE by CPU.
> 
> Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c       | 37
> ++++++++++++++++++++++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  2 ++
>  2 files changed, 39 insertions(+)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c
> b/drivers/mailbox/mtk-cmdq-mailbox.c
> index ead2200f39ba..d7c08249c898 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -25,7 +25,11 @@
>  #define CMDQ_GCE_NUM_MAX		(2)
>  
>  #define CMDQ_CURR_IRQ_STATUS		0x10
> +#define CMDQ_SYNC_TOKEN_ID		0x60
> +#define CMDQ_SYNC_TOKEN_VALUE		0x64
> +#define CMDQ_TOKEN_ID_MASK			GENMASK(9, 0)
>  #define CMDQ_SYNC_TOKEN_UPDATE		0x68
> +#define CMDQ_TOKEN_UPDATE_VALUE			BIT(16)
>  #define CMDQ_THR_SLOT_CYCLES		0x30
>  #define CMDQ_THR_BASE			0x100
>  #define CMDQ_THR_SIZE			0x80
> @@ -83,6 +87,7 @@ struct cmdq {
>  	struct cmdq_thread	*thread;
>  	struct clk_bulk_data	clocks[CMDQ_GCE_NUM_MAX];
>  	bool			suspended;
> +	spinlock_t		event_lock; /* lock for gce event */
>  };
>  
>  struct gce_plat {
> @@ -113,6 +118,38 @@ u8 cmdq_get_shift_pa(struct mbox_chan *chan)
>  }
>  EXPORT_SYMBOL(cmdq_get_shift_pa);
>  
> +void cmdq_set_event(void *chan, u16 event_id)

struct mbox_chan *chan

Is the event_id the hardware event id listed in include/dt-bindings/gce 
? I mean CPU could trigger the event which should be trigger by
hardware?

> +{
> +	struct cmdq *cmdq = container_of(((struct mbox_chan *)chan)-
> >mbox,
> +		typeof(*cmdq), mbox);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&cmdq->event_lock, flags);
> +
> +	writel(CMDQ_TOKEN_UPDATE_VALUE | event_id, cmdq->base +
> CMDQ_SYNC_TOKEN_UPDATE);
> +
> +	spin_unlock_irqrestore(&cmdq->event_lock, flags);
> +}
> +EXPORT_SYMBOL(cmdq_set_event);
> +
> +u32 cmdq_get_event(void *chan, u16 event_id)

Does this get the event status? I think event has only two status, set
or cleared. So I would like this to return true for set and false for
cleared.

Regards,
CK

> +{
> +	struct cmdq *cmdq = container_of(((struct mbox_chan *)chan)-
> >mbox,
> +		typeof(*cmdq), mbox);
> +	unsigned long flags;
> +	u32 value = 0;
> +
> +	spin_lock_irqsave(&cmdq->event_lock, flags);
> +
> +	writel(CMDQ_TOKEN_ID_MASK & event_id, cmdq->base +
> CMDQ_SYNC_TOKEN_ID);
> +	value = readl(cmdq->base + CMDQ_SYNC_TOKEN_VALUE);
> +
> +	spin_unlock_irqrestore(&cmdq->event_lock, flags);
> +
> +	return value;
> +}
> +EXPORT_SYMBOL(cmdq_get_event);
> +
>  static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread
> *thread)
>  {
>  	u32 status;
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h
> b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index a8f0070c7aa9..f05cabd230da 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -79,5 +79,7 @@ struct cmdq_pkt {
>  };
>  
>  u8 cmdq_get_shift_pa(struct mbox_chan *chan);
> +void cmdq_set_event(void *chan, u16 event_id);
> +u32 cmdq_get_event(void *chan, u16 event_id);
>  
>  #endif /* __MTK_CMDQ_MAILBOX_H__ */