[PATCH v2] PM: sleep: wakeirq: fix wake irq warning in system suspend

Qingliang Li qingliang.li at mediatek.com
Fri Mar 1 01:26:57 PST 2024


When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
  suspend_devices_and_enter()
    -> dpm_suspend_start()
      -> dpm_run_callback()
        -> pm_runtime_force_suspend()
          -> dev_pm_enable_wake_irq_check()
          -> dev_pm_enable_wake_irq_complete()

    -> suspend_enter()
      -> dpm_suspend_noirq()
        -> device_wakeup_arm_wake_irqs()
          -> dev_pm_arm_wake_irq()

To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.

Reviewed-by: Dhruva Gole <d-gole at ti.com>
Signed-off-by: Qingliang Li <qingliang.li at mediatek.com>
---
 drivers/base/power/wakeirq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index 42171f766dcb..5a5a9e978e85 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -313,8 +313,10 @@ void dev_pm_enable_wake_irq_complete(struct device *dev)
 		return;
 
 	if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED &&
-	    wirq->status & WAKE_IRQ_DEDICATED_REVERSE)
+	    wirq->status & WAKE_IRQ_DEDICATED_REVERSE) {
 		enable_irq(wirq->irq);
+		wirq->status |= WAKE_IRQ_DEDICATED_ENABLED;
+	}
 }
 
 /**
-- 
2.25.1




More information about the Linux-mediatek mailing list